Olympus Pin Tumbler Cam Lock, DCN2 7/8" Material Thickness with 3/4" Cylinder, Oil Rubben Bronze, Keyed Different

Olympus Pin Tumbler Cam Lock For Cabinets

Olympus pin tumbler cam lock gives you a compact DCN2 cam lock solution that secures doors or drawers while matching existing N Series systems. The keyed different setup assigns a unique key code to each lock, which helps separate access between cabinets or users. The 3/4 inch cylinder works with a 7/8 inch material thickness, so the lock seats correctly in typical cabinet panels without odd spacers or extra boring steps. The 1 inch face covers splintering around the bore, letting the lock clean up rough drill edges for a finished look on exposed surfaces. The oil rubbed bronze finish matches 10B hardware, so you can keep finish continuity on visible doors and panels. The zinc die cast body and pin tumbler cylinder provide a solid metal housing, which supports long-term key function in everyday cabinet use.

Key Details That Support Daily Use

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this cam lock align with existing N Series keying layouts, which simplifies planning for keyed different, keyed alike, or masterkeyed groups.
• The rekeyable cylinder, serviced via the cylinder retainer clip, allows the cam lock to be reconfigured on site, which supports key rotations or lock changes without swapping the complete lock body.
• The standard function with key removable in locked or unlocked position allows you to pull the key either way, which supports workflows where users lock or unlock and do not hold the key captive.
• The two reversible cams that work in all positions give flexibility for cam orientation, which lets you use the same lock for vertical or horizontal doors and reach correct throw direction without buying separate models.
• The 1 inch face design that covers splintering around the hole eliminates the need for a separate trim ring, which saves a step and visually masks drilling breakout on cabinet or fixture faces.
• The Olympus Lock, Inc. body and cylinder in zinc die cast construction provide a consistent metal housing, which supports precise key and cam action through repeated cycles in commercial or shop environments.

Installation Fit For 7/8 Inch Material

The DCN2 7/8 inch material thickness spec with a 3/4 inch cylinder defines how this cam lock seats in the panel, so boring depth and back side clearance line up with typical cabinet construction. The ANSI/BHMA A156.11 Grade 1 performance requirement that this product passed indicates it is tested to a recognized cam lock standard, which matters when you are matching specified hardware on commercial projects. The 1 inch face helps center the lock in the bore while covering edge breakout, so you can drill a straight-through hole and rely on the face to present a clean front. The N Series keyway and stock KD/KA options, with 4 pin standard and stock KA numbers 101, 103, 107, and 915, define how this lock fits into broader key charts in a shop, plant, or facility.

Cam Lock Use, Keying Options, And Performance

Where This DCN2-10B-KD Cam Lock Works Best

The DCN2-10B-KD cam lock, classified under cam locks in the locks and latches category, is suited to cabinet and fixture applications where a compact cam action is needed on 7/8 inch thick material. The two reversible cams that work in all positions create options for latching to the side, top, or bottom of the opening, which lets one lock style serve multiple cabinet layouts. The anti-rotation plate works with the body to resist lock body turning in the bore, which helps keep the keyway square with the door front under repeated use. The lost-motion cam shifter works with the cam to manage travel between locked and unlocked positions, which helps you position the cam throw relative to the strike or frame edge. The oil rubbed bronze 10B finish ties into design schemes using darker bronze tones, which matters on visible fronts where hardware is part of the overall look.

Why These Olympus Cam Lock Details Matter

The Olympus pin tumbler cam lock being easily rekeyable via the cylinder retainer clip means locksmiths or facility staff can change keying without disturbing the door or panel, which reduces downtime when rekeying groups of cabinets. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this lock participate in established N Series masterkeyed systems, which is important where you are adding locks to an existing key hierarchy. The stock keying options of KD/KA with 4 pin standard, along with stock KA numbers 101, 103, 107, and 915, support grouping cabinets under known key numbers, which simplifies labeling and record keeping. The masterkeyed 5 pin standard configuration and grand masterkeyed availability give higher-level key control, which is valuable in institutional and multi-user environments. The zinc die cast body and pin tumbler cylinder work together to provide predictable key feel and cylinder stability, which supports consistent operation over many lock cycles in commercial cabinetry.

Buyer Questions About This N Series Cam Lock

Select This Oil Rubbed Bronze Cam Lock Confidently

The Olympus pin tumbler cam lock in oil rubbed bronze pairs N Series keying with a DCN2 layout for 7/8 inch material, so it fits both appearance and key system demands on cabinet projects. The ANSI/BHMA A156.11 Grade 1 performance testing and zinc die cast construction support consistent operation in commercial or shop environments. The rekeyable design, N Series keyway, and keyed different stock keying give flexibility for future changes and key control plans. When a 3/4 inch cylinder cam lock with 1 inch face, multiple cam positions, and N Series compatibility is required, this model provides a proven layout for cabinets, fixtures, and similar installations.