Olympus Pin Tumbler Cam Lock For Cabinet Security

Olympus pin tumbler cam lock is a zinc die cast cam lock with a pin tumbler cylinder, so it delivers a familiar key feel while using a sturdy metal body for demanding cabinet and furniture applications. The DCN2 7/8 inch material thickness with 3/4 inch cylinder format is tailored for panels around that thickness, helping installers select a lock that positions correctly through the door or drawer front. The bright brass finish provides a traditional look that matches other US3 brass hardware, which helps maintain a consistent appearance across a project. The 1 inch face is designed to cover splintering around the bore, so a separate trim ring is not required in typical woodwork. Standard function allows the key to be removable in either the locked or unlocked position, which can streamline workflows where multiple cabinets are keyed and checked in sequence.

Key Features That Support Daily Use

• The zinc die cast body and cylinder create a solid cam lock assembly that resists typical wear while remaining workable for shop fabrication and field fitting.
• The DCN2 configuration for 7/8 inch material thickness with 3/4 inch cylinder helps align the cylinder face with common cabinet door or drawer fronts for cleaner installation results.
• The bright brass finish matches US3 hardware, allowing this cam lock to blend with other brass hinges, pulls, or doorsets on the same installation.
• The 1 inch face is sized to cover splintering around the lock hole, which can reduce extra finishing steps on drilled cabinet fronts.
• Two reversible cams that work in all positions provide flexibility for different door swing directions or latch orientations using the same core lock body.
• The standard key removable in locked or unlocked position function lets users remove the key in either state, which can simplify key handling in shops and facilities.
• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, coordinates with existing N Series key control where that system is already in use.
• Stock keying as keyed different or keyed alike in a 4 pin standard format supports both unique cabinet control and groups of cabinets on common keys.

Installation And Rekeying Details That Matter

The Olympus pin tumbler cam lock body and cylinder are both zinc die cast, giving installers a consistently machined housing for boring and mounting into cabinetry. The 1 inch face is designed to sit proud over the edge of the bore, so minor tear-out around the drilled hole is concealed once the lock is tightened. The DCN2 configuration is oriented for 7/8 inch material thickness with a 3/4 inch cylinder, which positions the cam to engage behind the panel while keeping the cylinder face close to flush at the front. This cam lock is described as easily rekeyable via a cylinder retainer clip, so locksmiths and maintenance teams can rekey on-site without replacing the entire lock body.

Using This DCN2-US3-KDMK Cam Lock In Projects

Where The Olympus N Series Cam Lock Fits

This Olympus pin tumbler cam lock is specified as part of the N Series keyway system, equivalent to National D4291 4-pin or D4292 5-pin key systems, which ties it into common key platforms used in millwork and fixture work. The cam lock is acknowledged by the Woodwork Institute, so it aligns with projects that reference WI acknowledged products in their hardware schedules. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, positions this lock for installations where a tested cam lock is required by specification rather than a purely residential grade alternative. The DCN2 7/8 inch material thickness design fits typical cabinet doors and drawer fronts in commercial casework, helping shops standardize one lock series across similar panel builds.

How Olympus Cam Lock Details Support Consistency

The Olympus pin tumbler cylinder uses a standard function where the key is removable in both locked and unlocked positions, so facilities can adopt a single operating pattern across multiple cabinets without varying key behavior. Two reversible cams are specified to work in all positions, which gives installers options to orient the cam for vertical or horizontal locking actions while retaining the same lock core and finish. Stock keying listed as KD/KA 4 pin standard with stock keyed alike numbers 101, 103, 107, and 915 allows project planners to coordinate groups of cabinets that share keys or remain separate, using documented key codes. Masterkeyed operation is described as 5 pin standard with grand masterkeyed capability available, so multi-level key systems can be built on this same DCN2-US3-KDMK cam lock platform. Together, these details help shops, locksmiths, and facility teams maintain consistent key systems and replacement practices across a run of cabinetry.

Common Questions About This Olympus Cam Lock

Selecting This Olympus Cam Lock For Your Project

The Olympus pin tumbler cam lock DCN2-US3-KDMK combines a zinc die cast construction, N Series keyway, and bright brass finish, making it a practical choice where 7/8 inch material thickness and 3/4 inch cylinder depth are specified. The 1 inch face that covers splintering, ANSI/BHMA A156.11 Grade 1 performance, and acknowledged Woodwork Institute listing tie this lock directly to commercial cabinet and fixture work. For projects using N Series or National D4291/D4292 key systems, this cam lock offers alignment with documented keying practices while delivering the appearance and function expected on professional installations.