Olympus Pin Tumbler Cam Lock, DCN-Series 1-7/16" Cylinder Keyed Different , Polished Brass DCN3-US3-KD

Olympus Pin Tumbler Cam Lock For Secure Cabinets

Olympus Lock pin tumbler cam lock DCN-Series 1-7/16 inch cylinder with keyed different polished brass DCN3-US3-KD is a zinc die cast cam lock that provides keyed control for cabinet and enclosure doors. The zinc die cast body and cylinder create a solid cam lock core, which helps maintain consistent performance in typical woodworking and casework environments. The 1 inch face is designed to cover splintering around the cylinder bore, so the cutout in wood or panel material does not require an additional trim ring. The standard function allows the key to be removable in either the locked or unlocked position, which can streamline how doors are managed on jobs where multiple openings must be serviced. The polished brass finish identified as finish 3 gives the lock a bright appearance that can coordinate with brass-toned hardware on cabinetry.

Key Cam Lock Details That Support Daily Use

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this cam lock operate within an established N Series key system, which matters when matching keys across multiple locks on a project.
• Stock keying in keyed different 4 pin standard provides each lock with its own combination in stock form, which supports basic security separation between individual doors or casework units in a run.
• Masterkeyed at 5 pin standard with grand masterkeyed availability allows higher-level keys to operate groups of locks, which is useful for facilities where supervisors or maintenance staff need tiered access control.
• The easily rekeyable design via the cylinder retainer clip allows the lock cylinder combination to be changed, which is valuable when key control policies call for rekeying after staff turnover or layout changes.
• Two reversible cams designed to work in all positions give flexibility in how the lock engages the frame, which helps adapt the same cylinder to different cabinet or panel layouts without changing the core lock body.

Cam Lock Fit, Function, And Cylinder Details

The DCN3-US3-KD uses a 1-7/16 inch cylinder length, which suits installations where additional reach through the door or panel thickness is required to engage the strike area. The 1 inch face size is intended to overlap the edge of the drilled hole, so any minor splintering in wood substrates is covered by the cylinder flange. The pin tumbler construction in a zinc die cast cylinder provides a familiar key feel that aligns with common N Series systems, which can simplify key management for installers and facility managers already working with this keyway. Passed ANSI/BHMA A156.11 Grade 1 performance requirements, this cam lock is tested to a recognized standard, which matters for projects that specify performance levels and Woodwork Institute acknowledged hardware.

Using This DCN3-US3-KD Cam Lock In Projects

Where This Olympus Cam Lock Is Typically Applied

This cam lock is categorized under locks and latches as a cam lock, positioning it for cabinet and similar enclosure applications where a rotating cam secures the door. The N Series keyway connection to National D4291 4-pin or D4292 5-pin systems ties it to projects that already rely on that key platform, helping keep key systems consistent across new and existing installations. Woodwork Institute acknowledged product status aligns the lock with woodworking industry expectations, which matters on commercial millwork jobs referencing WI standards. The 1 inch face that covers splintering is particularly relevant on wood or composite doors where drill-through operations can leave rough edges, allowing a clean finished look around the cylinder opening. The polished brass 3 finish also suits casework where brass tone hardware is used throughout to keep a unified visual specification.

Details That Support Reliable Locking Performance

The standard function with key removable in both locked and unlocked positions lets users remove the key after securing a door or while it is unlocked, which can fit workflows where doors are left open but the key is controlled separately. Two reversible cams designed to work in all positions give the installer latitude to orient the cam for clockwise or counterclockwise rotation and different latch directions, supporting varied cabinet layouts with one cylinder setup. The easily rekeyable feature through the cylinder retainer clip shortens the process of changing key combinations, which supports long-term key control without replacing the full lock body. Stock keying offering keyed different and keyed alike patterns through designated KA numbers 101, 103, 107, and 915 makes it possible to specify matching or unique key groups across an installation. Passing ANSI/BHMA A156.11 Grade 1 performance requirements signals that the cam lock has been tested against a recognized benchmark, which helps meet specs calling for Grade 1 cam hardware. The combination of zinc die cast body and cylinder, pin tumbler mechanism, and N Series keyway structure ties mechanical strength and key control into a single cam lock platform.

Common Questions About This N Series Cam Lock

Selecting The DCN3-US3-KD For Your Next Install

The DCN3-US3-KD Olympus Lock pin tumbler cam lock combines an N Series keyway, a 1-7/16 inch cylinder, and a 1 inch face that covers splintering, aligning with woodworking and millwork needs. Passing ANSI/BHMA A156.11 Grade 1 and holding Woodwork Institute acknowledgment positions this cam lock for projects calling out both performance standards and industry-recognized products. The rekeyable design via the cylinder retainer clip, along with keyed different stock and masterkeyed options, supports long-term key control on commercial and institutional jobs. For cabinet and enclosure work that specifies polished brass finish and N Series keying, this DCN-Series cam lock offers a focused solution built around that key platform.