Olympus DCN4 Pin Tumbler Cam Lock, 1-1/2" Material Thickness with 3/4" Bore Diameter, Keyed Different, Bright Brass

Olympus DCN4 Pin Tumbler Cam Lock For Cabinets

Olympus DCN4 pin tumbler cam lock is a zinc die cast cam lock designed for doors or panels built from 1-1/2 inch material with a 3/4 inch bore diameter, so it suits thicker cabinet or casework layouts using that standard hole size. The bright brass finish, identified as US3, provides a brass appearance that can match other brass-colored hardware in the same installation. Both the body and cylinder use zinc die cast construction with a pin tumbler mechanism, giving a familiar key feel for users who already work with N Series systems. This lock uses an N Series keyway equivalent to National D4291 4-pin or D4292 5-pin systems, which allows it to sit in projects already standardized on that key family. The lock is keyed different as standard, so each unit has its own keying out of the box for separate cabinet security.

Key Job-Ready Details For Olympus Cam Lock

• The DCN4-US3-KD lock is easily rekeyable via a cylinder retainer clip, which lets a shop or facility change keying as requirements change without replacing the entire lock body.
• The standard function keeps the key removable in either the locked or unlocked position, so users can pull the key after locking or during service access without changing their normal routine.
• The cam lock body passed ANSI/BHMA A156.11 Grade 1 performance requirements, giving installers a performance reference that aligns with commercial hardware expectations.
• Two reversible cams work in all positions, so the same lock mechanism can handle different door swing or latch directions by changing the cam orientation.
• The 1 inch face covers splintering around the 3/4 inch bore, allowing the face to conceal minor chipping from drilling and eliminating the need for an additional trim ring.
• The lock can be keyed together with other N Series locks, which helps a project share one key across multiple locking points when an N Series system is already in use.

Cam Lock Fit For 1-1/2 Inch Material Thickness

This Olympus Lock, Inc. cam lock is specified for 1-1/2 inch material thickness with a 3/4 inch bore diameter, so it aligns with thicker cabinet doors, drawer fronts, or panels built to that dimension. The 1 inch face diameter overlaps the bore edge, which hides drill breakout and leaves a clean finished appearance on the front of the panel. Because the cam lock uses a pin tumbler cylinder in a zinc die cast body, it fits standard cabinet lock prep practices that already rely on similar components. The N Series keyway ties into established National D4291 4-pin or D4292 5-pin system layouts, which supports consistent keying schemes across different lock points within the same environment.

Using This Olympus Cam Lock In Real Projects

Bright Brass Cam Lock For N Series Keying

This bright brass cam lock uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it integrates with existing N Series key control where that system is already specified. Stock keying is KD/KA with 4 pin standard, and stock KA numbers 101, 103, 107, and 915 give defined keyed-alike groupings that can be matched when organizing banks of locks in a shop or facility. The lock is masterkeyed with 5 pin standard, with grand masterkeyed capability available, which allows multi-level access structures using the same cam lock platform. Because the lock can be keyed together with other N Series locks, a project can use this cam lock alongside other N Series products while maintaining a coherent key plan. The bright brass US3 finish lets this cam lock visually coordinate with other US3-finished components around cabinets or display fixtures.

Rekeyable Function And Cam Options For Workflow

The DCN4-US3-KD cam lock is easily rekeyable via a cylinder retainer clip, so facilities can respond to key changes by servicing the cylinder rather than swapping bodies, which can reduce time spent on retrofit work. The standard function keeps the key removable in both locked and unlocked positions, allowing staff to remove the key after opening or securing a cabinet without changing how they typically handle keys. Two reversible cams work in all positions, so the same lock can handle various latch directions simply by setting the cam orientation, which is useful when a shop uses the same part number across mixed cabinet designs. The Woodwork Institute acknowledges this product, tying it to recognized woodworking standards and giving specifiers a reference for project documentation. Passing ANSI/BHMA A156.11 Grade 1 performance requirements provides a benchmark for how the lock performs in test conditions that are familiar within the commercial hardware field.

Common Questions About Olympus DCN4 Cam Lock

Select This Cam Lock For N Series Projects

The Olympus DCN4 pin tumbler cam lock, DCN4-US3-KD, combines N Series keyway compatibility with rekeyable construction, reversible cams, and a bright brass US3 face sized for 3/4 inch bores in 1-1/2 inch material. When a project needs a cam lock that aligns with ANSI/BHMA A156.11 Grade 1 performance requirements and Woodwork Institute acknowledgment, this model offers a defined specification path. Use this cam lock where N Series keying, brass appearance, and flexible cam orientation all contribute to a consistent cabinet hardware layout.