Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1-1/2 inch continuous hinge roll describes a Rockford Process Brass 1-1/2 inch by 100 foot steel piano hinge that supports long, straight hinge runs, which helps installers handle extended lids and bench tops with a single, consistent hinge line. The piano hinge design provides a continuous pivot along the entire length, which spreads load across the run and helps lids on pianos, chest boxes, and benches move smoothly in everyday use. The 1-1/2 inch open width sets a defined bearing surface, which helps you plan edge construction and clearance on lids and cases. Supplied as a 100 foot roll, the hinge can be cut to length on site, which helps match custom spans and reduce waste on varied cabinet or bench dimensions. A nickel pin runs through the knuckles, forming the rotating axis, which maintains a metal-to-metal pivot suited to lid and bench motion.
This piano hinge has countersunk holes on 60 mm, or 2-3/8 inch, centers, which gives a predictable mounting pattern that simplifies marking out and drilling along case and lid edges. The 1-1/2 inch open width defines the leaf coverage over the mating edges, which helps you plan your set-back and overhang so the lid closes cleanly without bind. With a 100 foot roll length, you can cut continuous pieces for full-span piano lids, chest boxes, and bench seats, which avoids hinge breaks that can affect alignment. The steel construction combined with the nickel pin provides a metal bearing surface through the knuckles, which supports repeated swinging motion along the entire length once fastened.
The web description specifies use with piano lids, chest boxes, and benches, which places this hinge squarely in lid and seat applications where a full-length pivot is preferred. The 1-1/2 inch open width gives a moderate leaf size that works well on typical furniture-scale lids, which helps balance strength with a relatively compact profile along the edge. Because the hinge is supplied as a 100 foot roll, a shop can service several piano lids or multiple chest and bench builds from a single product, which keeps hinge appearance and motion uniform across a project set. The continuous design suits applications where an even reveal and consistent gap along the lid are important, such as matched benches or coordinated storage chests.
The 100 foot steel piano hinge roll gives you freedom to cut custom lengths, which supports projects with non-standard spans or multiple lid sizes while keeping the same Rockford Process design. Regular countersunk holes on 60 mm, or 2-3/8 inch, centers create a simple repetitive layout, which can speed production work because drilling or driving follows a fixed rhythm along the edge. The 1-1/2 inch open width is a fixed dimension that lets you standardize edge build-ups and clearances on your drawings, which helps reduce layout variation between different workers on the same job. The nickel pin running through the knuckles forms a continuous pivot axis, which provides a clear reference line when aligning the hinge to lid and case, helping maintain straight operation along long piano, chest, or bench runs.
The hinge is described as a 1-1/2 inch wide continuous hinge in a 100 foot roll, which helps you plan edge width and lets you cut lengths to match each lid or bench span.
The hinge has countersunk holes on 60 mm, or 2-3/8 inch, centers, which provides a consistent fastener pattern that helps distribute load evenly along long piano or chest lids.
The web description specifies use with piano lids, chest boxes, and benches, which makes it suited to furniture and casework projects needing a full-length pivot along a lid or seat.
The product is described as a steel piano hinge with a nickel pin, which creates a metal-to-metal pivot along the knuckles for repeated opening and closing in normal lid use.
The 1-1/2 inch open width defines the leaf coverage on lid and case edges, which helps you lay out setbacks and clearances so the lid seats properly when closed.
The CP6-2203S-XX1 manufacturer part number identifies this specific Rockford Process 1-1/2 inch wide, 100 foot steel piano hinge roll, which helps match specifications across repeat orders.
This Rockford Process Brass 1-1/2 inch by 100 foot steel piano hinge roll with a nickel pin and countersunk holes on 60 mm centers provides a continuous hinge solution for piano lids, chest boxes, and benches. The defined 1-1/2 inch open width and regular hole spacing help streamline layout on case and lid edges, while the long roll format supports multiple custom-length runs from one product. For shops and installers needing a consistent continuous hinge across several furniture or casework pieces, this CP6-2203S-XX1 hinge offers a single specification that carries through design, cutting, and mounting.
Sold In: 1 Roll