Undermount Drawer Set Built for the Waste and Recycle Cabinet

This Blum MOVENTO waste/recycle set is a configured undermount package for pull-out bin cabinets with a 15 inch minimum opening width. The set combines over-travel extension with TIP-ON BLUMOTION so bins clear the countertop overhang and open hands-free on a touch, then settle shut silently. Rated 135 lb per pair, it handles a loaded double-bin pull-out without strain.

Key Features

• Over-travel extension carries the drawer past the full slide length so bins clear the countertop edge and are fully reachable.
• 135 lb capacity per pair covers the weight of full waste and recycling bins in a residential or light commercial setting.
• TIP-ON BLUMOTION compatibility means a light press on the handle-less front opens the bin drawer, and integrated BLUMOTION damping brings it back silently.
• 21 inch nominal length suits the deep base cabinets typically used for waste and recycle pull-outs.
• Fits face-frame and frameless cabinets, giving installers flexibility across traditional and European-style cabinetry.
• Steel construction with zinc finish and a roller-bearing carriage for a smooth, quiet pull cycle after cycle.

Where Over-Travel Makes the Difference

Standard full-extension slides bring a drawer to the cabinet face — useful for most drawers, but not for a waste bin under a countertop overhang. When the bin sits behind a deep apron or under a thick countertop, full extension alone leaves the rear bin partially blocked. Over-travel pushes the drawer past the face of the cabinet, so both bins clear the overhang and nothing requires reaching into a dark corner. This set is configured specifically for that scenario, sized to a 15 inch minimum opening so it works in the compact base cabinets that typically house residential waste and recycle drawers.

Construction and Motion

The MOVENTO runner uses a roller-bearing carriage in a steel zinc-finished profile — the same platform found in Blum's premium undermount line. The integrated BLUMOTION damper is the closing mechanism: it catches the drawer in the last inch of travel and controls the close, so a bin loaded with bottles and cans settles shut rather than slamming. The TIP-ON BLUMOTION system adds touch-open capability without a separate drive unit or power supply — the mechanism is mechanical, lives in the slide, and ejects the drawer at a gentle press on the front panel. Drawer sides up to 5/8 inch (16mm) thick are supported; build the box to Blum's published specification for this set, including the rear notch and the locking-device drilling required by the MOVENTO series.

The Right Fit for This Install

This set suits cabinetmakers and installers building or retrofitting residential and light commercial waste and recycling stations. The 15 inch minimum opening fits the narrow base cabinets common in kitchens where space is tight but two bins are still required. For face-frame cabinets, add the MOVENTO-series rear mounting brackets — those brackets are series-specific and not interchangeable with TANDEM or other Blum undermount hardware. Front locking devices are MOVENTO-specific as well; confirm what ships with this set and order any missing accessories before the install date.

A Configured Solution for a Specific Job

When the waste and recycle cabinet needs to perform cleanly — opening hands-free, clearing the countertop, and closing silently under load — this MOVENTO set provides the over-travel, capacity, and motion technology to make that happen in a single configured package.