Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
RED HG 1MM x 23MM edgebanding is a 150LM roll from 3B S.p.A designed to finish board and panel edges in a matching red high gloss look. The RED HG identification ties directly to the high gloss PET panel line, so the edge material visually aligns with 3B Surfaces, High Gloss and Matte PET Panels in the same color series. The 1MM thickness gives the edge strip enough body for clean machining on panel edges, helping create a solid, defined profile instead of a thin film look. The 23MM width is sized for common furniture and cabinet panel thicknesses, giving enough coverage to trim flush without starving the edge. The 150LM roll format supplies a continuous length for production runs, which reduces joint breaks along long cabinet sides or tall panels.
This RED HG, 1MM x 23MM, 150LM/roll material is sized for streamlined panel edge processing. The 1MM construction responds well to typical trimming operations after bonding, so installers can bring edges flush without over-thinning the visible band. With 23MM of width available, the edgeband spans the edge of many cabinet and furniture panels while leaving enough overhang to cut back cleanly. That width-to-thickness combination fits standard edgebander settings, reducing setup changes when moving between similar PET-faced parts. Across the 150LM roll, shops can process a run of matching components while keeping the same feed rate, heat, and trimming parameters.
The RED HG, 1MM x 23MM, 150LM/roll product sits in the 3B Surfaces, High Gloss and Matte PET Panels category, so it is aimed at finishing board and panel products in that family. The RED HG color and high gloss designation align with PET-faced panels, which lets the edge detail follow the same visual language as the board surface. On cabinet doors, drawer fronts, and vertical partitions, the 1MM x 23MM format gives enough material to finish both long and short edges from a single roll. For panel-based furniture, that continuous 150LM length supports repeating the same high gloss red edge detail across multiple pieces in one project. In shop workflows centered on PET panels, keeping the edging and boards within the 3B class simplifies color selection and job planning.
The 1MM thickness on this RED HG product provides a measurable edge layer, which helps resist visual irregularities when panels are handled or trimmed. Because the band is not ultra-thin, it responds predictably to standard trimming knives and scrapers, which supports repeatable results from part to part. The 23MM width offers tolerance for minor panel thickness variation while still leaving trimming allowance, reducing the chance of narrow edges on finished parts. With 150LM available on each roll, shops can keep a single setup running across a sequence of components, limiting mid-job spool changes and keeping cut quality consistent. The manufacturer part number 7333P8470A and the 3B product class give installers a precise identifier when matching edges to specific high gloss red PET panels.
The RED HG, 1MM x 23MM, 150LM/roll product provides 1MM thickness, 23MM width, and 150 linear meters per roll, giving enough material for multiple PET panel edge runs.
The 1MM thickness on this RED HG edgebanding creates a defined edge profile that trims cleanly, supporting a solid-looking border on cabinet and furniture panels.
The RED HG designation aligns with the High Gloss PET Panels group, so the edge color and surface character coordinate with matching 3B Surfaces panel faces.
The 23MM width covers typical panel thicknesses with trimming allowance, supporting clean flush edges after routing or scraping without exposing the core.
The 150LM roll length lets shops edge multiple components in sequence, reducing roll changes and helping keep machine settings consistent across a project.
The manufacturer part number 7333P8470A identifies this exact RED HG, 1MM x 23MM, 150LM/roll item for ordering and matching to 3B PET panel jobs.
The RED HG, 1MM x 23MM, 150LM/roll edgebanding from 3B S.p.A aligns directly with 3B Surfaces, High Gloss and Matte PET Panels, giving a coordinated way to finish panel edges. The 1MM thickness and 23MM width work well with common cabinet and furniture panel dimensions, supporting clean trimming and a defined edge line. With 150LM per roll and the precise identifier 7333P8470A, this product fits shops that want consistent high gloss red edges across multiple PET-based components. For panel projects drawing from the 3B PET range, this RED HG roll offers a focused option for matching edge treatments.
Sold In: 150 m