Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Calacatta Marble molding is a laminate edge molding that gives a finished look on all sides, so countertops, islands, desks, and work stations present a continuous decorative surface rather than exposed core material. The 3460-46 Calacatta Marble pattern in Etchings Finish provides a specific decorative laminate appearance, which helps match this molding visually with Formica surfaces using the same design and texture. As a Laminate Edge Molding, this product is designed to finish laminate work surfaces, so fabricators can carry the decorative look across both the top and the exposed edges of a project. The Edge molding is part of Formica IdealEdge, so it fits into a coordinated system for decorative surfacing projects where brand and pattern consistency matter across multiple components.
This Formica IdealEdge Calacatta Marble molding is designed as a Laminate Edge Molding, so it is applied as a decorative edging component to the edge of laminate work surfaces rather than as a full sheet material. The manufacturer recommends AFF522 series glue, sold separately, which provides a specified adhesive option for bonding this molding to appropriate substrates during installation. The molding is suitable for straight, curved, clipped, and 90 degree edges, so installers can follow the geometry of the countertop, island, desk, or work station perimeter without changing edge types when transitioning between these shapes. The 1-1/2 inch profile height and 12 foot length work together to cover typical edge build-ups along longer runs, which supports efficient layout and cutting during fabrication.
This Formica IdealEdge 3460-46 Calacatta Marble molding is identified for use on countertops, islands, desks, and work stations, so it directly aligns with common laminate shop projects in residential, commercial, and institutional environments where horizontal work surfaces are finished. Being suitable for straight, curved, clipped, and 90 degree edges means a single edge profile can follow inside corners, outside corners, and gentle curves around an island or workstation, which supports consistent appearance around the full perimeter. The Etchings Finish on the Calacatta Marble pattern provides a defined decorative surface, so fabricators working with matching Formica laminate can continue the same design down the edge for a coordinated installation. As part of the Laminate Edge Moldings product class from Formica Corporation, this molding integrates with standard laminate fabrication processes, so shops focused on laminate work can incorporate it into existing cutting and bonding workflows.
The 1-1/2 inch profile height gives installers a known dimension to work with when planning substrate build-up and trimming, which helps align the face of the edge with the laminate surface and manage overhang consistently along the run. The 12 foot length allows long stretches of countertop or work station front edge to be covered with fewer joints, which reduces alignment breaks along the decorative pattern and simplifies layout on larger projects. The moisture barrier MDF core is specified in the product data, so the edge structure is designed with moisture barrier properties that support performance where work surfaces encounter routine cleaning or occasional spills. The recommended AFF522 series glue, sold separately, provides a named adhesive series for bonding this molding, which helps installers select a glue system aligned to the product expectations. The 10 year limited warranty covering delamination of the edge ties performance directly to the edge staying bonded, which is important for shops that stand behind their laminate work over extended service life.
This product is a Laminate Edge Molding from Formica Corporation, so it is used to finish exposed edges on laminate countertops, islands, desks, and work stations with a matching decorative surface.
This IdealEdge molding is intended for use on countertops, islands, desks, and work stations, so it suits many laminate work surface layouts in shop or jobsite projects.
The molding is suitable for straight, curved, clipped, and 90 degree edges, so it can follow various perimeter shapes without changing to a different profile.
The molding has a 1-1/2 inch profile height and a 12 foot length, which supports covering standard edge build-ups over long runs on countertops or work stations.
This molding has a moisture barrier MDF core, so the edge structure is designed with moisture barrier properties aligned to normal countertop and work station environments.
The recommended glue for this molding is the AFF522 series, sold separately, which provides a specified adhesive choice for bonding during fabrication or installation.
This Formica IdealEdge 3460-46 Calacatta Marble Etchings Finish Waterfall Edge Molding combines a 1-1/2 inch profile height, 12 foot length, and moisture barrier MDF core with suitability for straight, curved, clipped, and 90 degree edges, so it supports continuous decorative runs on countertops, islands, desks, and work stations. The product is part of Formica Corporation Laminate Edge Moldings and carries a 10 year limited warranty covering delamination of the edge, so it offers defined performance expectations for laminate-focused shops planning long-term projects around the Calacatta Marble design.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |