Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Jet Sequoia defines this 1-1/2 inch high laminate ogee edge molding, so the edge treatment visually matches the Jet Sequoia Etchings Finish laminate across the run. That color and finish match helps installers carry the same surface look from the horizontal plane down the vertical face, which keeps countertop and work surface designs consistent without switching materials at the edge. The 144 inch length is designed to span long runs, reducing field joints along the front profile and cutting down on alignment work at seams. Because this molding is part of Formica IdealEdge laminate edge moldings, it is built as a decorative edge rather than a structural component, which helps installers finish the visible perimeter while relying on the substrate for strength. The 1-1/2 inch height supports taller build-ups so the full lamination stack can be covered in one pass.
This Jet Sequoia IdealEdge molding is specified for use on countertops, islands, desks, and work stations, so its geometry and finish are tuned to those horizontal work surfaces. The molding is suitable for straight, curved, clipped, and 90 degree edges, which means one product can run continuous around outside corners, gentle curves, and angled sections without switching profiles. Recommended glue from the AFF522 series, sold separately, is identified for this edge, guiding adhesive selection toward products formulated for this laminate and MDF core combination. That pairing helps bond the moisture barrier MDF core to the substrate and maintain the Etchings Finish at the face. Because the piece is 144 inches long, sections can be laid out to follow the primary run of a countertop front before trimming back for returns or clipped corners.
This Formica IdealEdge Jet Sequoia ogee molding is part of the laminate edge moldings category, so it is intended to complete decorative edges rather than act as a structural nosing. It is listed for countertops, islands, desks, and work stations, which makes it suited to residential and commercial work surfaces that benefit from a coordinated laminate appearance. The Etchings Finish provides the Jet Sequoia pattern along the front curve, helping the bullnose-style contour flow visually from the horizontal laminate into the shaped edge. Because the molding is suitable for straight, curved, clipped, and 90 degree edges, installers can carry the same profile around outside corners, radiused ends, and clipped returns on an island or counter. That flexibility matters when building multi-direction layouts, since one edge style handles diverse conditions without changing visual language mid-run. The 12 foot length supports long reception counters, kitchen islands, or bench runs, which reduces splicing and helps keep the ogee curve consistent.
The moisture barrier MDF core under this Formica IdealEdge Jet Sequoia molding supports the laminate face in typical countertop and work station conditions where incidental moisture is present, helping the decorative surface stay bonded along the ogee curve. The 1-1/2 inch height offers coverage for build-up edges, so plywood or particleboard build-ups can be hidden behind the laminate and MDF combination for a cleaner presentation. Being part of the laminate edge moldings product class means the material thickness and profile are tuned to work with Formica laminate systems, which helps align the top surface sheet with the edge face. The identified AFF522 series glue, sold separately, is recommended for this product, so bonding and open time expectations can be coordinated with that adhesive family to secure the MDF core to the substrate. Over time, the 10 year limited warranty covering edge delamination provides a defined performance window for the bond between laminate and core in normal use.
This Formica IdealEdge Jet Sequoia ogee molding is 1-1/2 inches high and 144 inches long, so it spans long runs while covering taller build-up edges along countertops or work stations.
This molding is for use on countertops, islands, desks, and work stations, allowing the Jet Sequoia Etchings Finish to carry from the horizontal surface onto the shaped front edge.
The Jet Sequoia IdealEdge molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can run continuous across various edge conditions on a project.
This IdealEdge piece uses a moisture barrier MDF core, providing a stable backing for the laminate face along the ogee profile in typical countertop and work station environments.
The recommended glue is the AFF522 series, sold separately, which is specified for this laminate edge molding and MDF core combination during installation.
The Formica IdealEdge Jet Sequoia ogee molding carries a 10 year limited warranty that covers delamination of the edge under normal specified use conditions.
This Formica IdealEdge 3476-46 Jet Sequoia Etchings Finish ogee molding pairs a 1-1/2 inch profile with a 12 foot length, so long countertop, island, desk, and work station runs can be trimmed with one continuous, color-matched edge. The moisture barrier MDF core and laminate construction are designed for interior work surface environments, while suitability for straight, curved, clipped, and 90 degree edges keeps layout options open. For projects built around Jet Sequoia laminate, this molding allows the decorative surface and front profile to read as one coordinated system from the top down the shaped face.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |