Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Jet Sequoia gives laminate countertops, islands, desks, and work stations a finished look on all sides, so the edge presentation matches the surface visually and reads as a continuous design instead of an exposed core. The 3476-46 Jet Sequoia Etchings finish waterfall edge molding follows the Formica pattern, which keeps the edge color and texture consistent from horizontal to vertical surfaces on a run of cabinets. The 1-1/2 inch high by 144 inch long molding spans typical countertop thicknesses along long stretches, reducing seams on straight, clipped, and 90 degree edges. The laminate edge molding design works on both straight and curved applications, so installers can carry the same Jet Sequoia edge detail across corners, clipped corners, and radius ends in the same space. The IdealEdge construction uses an MDF core with a moisture barrier, so the edge is built to resist routine moisture exposure found around work stations and countertops.
This Formica IdealEdge 3476-46 Jet Sequoia molding is built as a 1-1/2 inch high laminate edge, so it aligns with common laminate build-ups along the front of countertops and work stations without additional face buildouts. The 12 foot length allows installers to run a single continuous piece along long counters, islands, or desk runs, limiting field joints that would otherwise need extra trimming and finishing. Its suitability for straight, curved, clipped, and 90 degree edges means the same profile can be used through inside corners, outside corners, and radius ends, so layout changes do not require a different edge type. The MDF core with a moisture barrier responds well to typical countertop environments, so routine exposure to water around sinks or work areas does not target an exposed core on the edge profile.
This Formica IdealEdge Jet Sequoia edge molding is specified for countertops, islands, desks, and work stations, so it is aimed at horizontal surfaces that need a coordinated decorative edge rather than a raw substrate line. In kitchen, break room, or lab-style layouts, the 144 inch length covers long cabinet runs or island tops in one direction, reducing the number of splices that have to be trimmed and blended. The ability to use the same molding on straight, curved, clipped, and 90 degree edges means an island with radiused corners, clipped ends, and squared backs can all share the Jet Sequoia Etchings waterfall profile. That flexibility helps maintain the same edge shape and color around an entire installation, whether it is a simple desk run or a more complex workstation array.
The 3476-46 Jet Sequoia Etchings finish ties directly to the Formica surface pattern, so when installers specify the same pattern for the top, the edge molding visually blends with the field laminate and reduces contrast at the front edge. The waterfall shape in a 1-1/2 inch height gives enough coverage to transition from the top surface down the front, which helps conceal substrate layers and reinforces the illusion of a thicker solid top. The moisture barrier MDF core adds resistance to everyday moisture along the edge, supporting the 10 year limited warranty that covers delamination of the edge under specified conditions. Using the recommended AFF522 series glue (sold separately) provides a defined adhesive match for this laminate edge molding, giving fabricators a clearly referenced bonding option when laying out shop processes. Across countertops, islands, desks, and work stations, these details support repeatable fabrication steps and consistent finished appearances from one job to the next.
Formica IdealEdge Jet Sequoia edge molding is 1-1/2 inches high by 144 inches long, so it covers standard countertop build-ups along extended runs with a single decorative edge piece.
This laminate edge molding is specified for countertops, islands, desks, and work stations, so it serves any horizontal work surface needing a coordinated decorative edge profile.
The IdealEdge Jet Sequoia profile is suitable for straight, curved, clipped, and 90 degree edges, letting one molding type handle varied corner and end conditions on a project.
This Formica edge molding uses an MDF core with a moisture barrier, so the edge is engineered to resist typical moisture exposure around countertops and work stations.
The recommended glue for this Formica IdealEdge molding is the AFF522 series (sold separately), giving installers a referenced adhesive pairing for bonding to suitable substrates.
This Formica IdealEdge Jet Sequoia molding carries a 10 year limited warranty that covers delamination of the edge, reflecting its construction for typical laminate edge service.
Formica IdealEdge Jet Sequoia 1-1/2 inch by 144 inch waterfall edge molding brings the 3476-46 Jet Sequoia Etchings finish from the top surface down the edge, so laminated countertops, islands, desks, and work stations read as a coordinated unit. With an MDF core and moisture barrier, a profile suitable for straight, curved, clipped, and 90 degree edges, and a 10 year limited warranty covering edge delamination, this molding is set up for laminate fabrication environments. Use this profile wherever the Jet Sequoia pattern is specified and a finished decorative edge is required along visible fronts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |