Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Argento Romano is a laminate edge molding that gives countertop and furniture projects a finished look on all sides. The 1-1/2 inch high double radius profile creates a smooth transition at the edge, which helps projects read as a single continuous surface instead of a separate edge strip. The Argento Romano pattern in Etchings finish visually ties into matching laminate surfaces, so installers can carry the design right over the edge of countertops, islands, desks, and work stations. The 12 foot length lets fabricators run long stretches with fewer joints, which reduces layout time and limits visible seams on straight or gently curved runs. Because this IdealEdge molding is designed for straight, curved, clipped, and 90 degree edges, one profile can serve multiple layout conditions on the same job, simplifying planning.
This Formica IdealEdge laminate molding is built on a moisture barrier MDF core, so it is ready to bond to substrate edges with contact cement or another appropriate adhesive system. The 1-1/2 inch height provides coverage for typical countertop or work surface build-ups, allowing installers to align the molding so the decorative face hides the core edge while presenting the Argento Romano pattern at the front. The double radius edge geometry gives two rounded transitions, which helps the molding blend into the top surface after trimming and flush work. Formica recommends AFF522 series glue, sold separately, as the adhesive for this edge, so installers can standardize on a known glue line when laying up countertops, islands, desks, and work stations.
This Formica Corporation IdealEdge molding is specified for use on countertops, islands, desks, and work stations, so it slots directly into residential or commercial laminate projects that need a decorative front edge. The 12 foot length is suited to kitchen runs, reception counters, or longer desk assemblies where a single stick can often span the full piece. Because the profile works with straight, curved, clipped, and 90 degree edges, fabricators can bend layouts around corners or contour shapes while staying with the same Argento Romano Etchings finish. The moisture barrier MDF core supports use in typical countertop environments where spills and wipe-downs are part of daily use, keeping the structural core protected behind the laminate surface.
The 1-1/2 inch profile height gives installers a clear reference when aligning this IdealEdge molding to common deck thicknesses, so the front face can be positioned to cover the substrate cleanly before trimming. The double radius form is engineered so that, after bonding and flush trimming, the top radius blends into the laminate deck while the lower radius defines the front edge line, helping achieve a repeatable look from piece to piece. Since Formica identifies AFF522 series glue as the recommended adhesive, crews can plan their layup process around that glue system, which supports consistent open time and bond behavior across multiple edges. The 10 year limited warranty against edge delamination underscores the performance expectation of the bond between laminate face and core, giving shops a defined service window for installed projects. Together, these details help reduce rework by giving fabricators a predictable profile, material structure, and adhesive pairing for repeat jobs in Argento Romano Etchings.
Formica IdealEdge Argento Romano is a laminate edge molding designed to give a finished look on all sides of countertops, islands, desks, and work stations using the Argento Romano pattern in Etchings finish.
This Argento Romano IdealEdge molding is for use on countertops, islands, desks, and work stations, so it integrates into laminate projects that require coordinated decorative front edges.
The Formica IdealEdge molding has a 1-1/2 inch profile height and a 12 foot length, which suits typical countertop build-ups and allows long runs with fewer joints.
The double radius profile shapes both exposed corners of the edge, creating smooth transitions that soften the front of the surface and help the edge blend into the laminate deck.
This Formica laminate edge uses a moisture barrier MDF core, which protects the core from incidental moisture at the edge and supports long-term performance in countertop environments.
This IdealEdge molding is paired with AFF522 series glue, sold separately, as the recommended adhesive, giving installers a specified glue choice for bonding the edge.
This Formica Corporation IdealEdge 6697-46 Argento Romano molding pairs a 1-1/2 inch double radius profile with a moisture barrier MDF core, so it is ready for countertop, island, desk, and work station edges. The 12 foot length helps span longer runs with minimal seams, while the Argento Romano pattern in Etchings finish maintains visual continuity with matching laminate surfaces. By using the recommended AFF522 series glue with this molding, shops can build repeatable setups for Argento Romano projects that need a coordinated, finished edge.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |
Sold In: 1 Each
