
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Formica IdealEdge Argento Romano is a laminate edge molding that finishes exposed laminate edges so countertops and work surfaces present a continuous look. The Argento Romano design in Etchings finish matches the laminate pattern, so the edge visually blends with the top surface on straight runs and turns. The 1-1/2 inch profile covers common countertop build-ups, so the substrate edge and laminate layers stay concealed during everyday use. A 144 inch length helps run full stretches of tops, islands, or desks with fewer joints, which keeps the finished edge visually cleaner and reduces layout breaks. The laminate construction is designed as part of Formica IdealEdge, so it works within standard laminate fabrication methods in a shop or on site. This molding creates a finished edge detail around islands, desks, and work stations without exposing raw core material.
This Formica IdealEdge laminate edge molding uses an MDF core, so it is intended to be bonded to the substrate with adhesive rather than mechanical fastening. The recommended glue is the AFF522 series, sold separately, so installers can select an adhesive system matched to the product guidance. The 1-1/2 inch profile height gives coverage for common countertop and work surface constructions, so the installer can align the molding to the top and trim the excess for a flush edge. The long 12 foot length supports continuous installation along countertops, islands, desks, and work stations, so joints can be placed only where layout or transport requires them. The moisture barrier noted in the description is part of the construction, so the edge is designed to resist moisture exposure at vulnerable front and corner areas of laminate assemblies.
This laminate edge molding is designed for use on countertops, islands, desks, and work stations, so it fits typical laminate fabrication found in residential and commercial millwork. The Argento Romano pattern in Etchings finish allows the edge to coordinate with matching laminate sheets, so fabricators can carry one design from horizontal surfaces through the front edge. The 1-1/2 inch profile works with many standard build-ups used in laminate tops, so it can transition from the deck surface down the front without exposing the core. Because it is suitable for straight, curved, clipped, and 90 degree edges, one molding type can be used across outside corners, inside returns, and soft curves, so shops can plan jobs around a single decorative edge style.
The MDF core provides a stable base under the laminate face, so trimming and profiling operations behave predictably with common laminate tools. The moisture barrier described in the product helps protect this core along exposed edges, so edge performance is supported where water or cleaning solutions might contact the front of the top. The 12 foot length keeps more of the run in a single piece, so alignment between pattern on the deck and pattern on the edge can be managed across a longer span with fewer joints to sequence. The AFF522 series glue recommendation directs installers to an adhesive family identified for this product, so bond performance between the IdealEdge and the substrate is addressed as part of the system. The 10 year limited warranty on delamination of the edge reflects the intended durability of the laminated bond, so fabricators can present a defined service life expectation for the edge detail on their completed tops.
This molding is a Formica IdealEdge laminate edge designed to give a finished look on all sides of laminate countertops, islands, desks, and work stations where exposed edges would otherwise show raw core.
The Argento Romano IdealEdge molding is 1-1/2 inches high and 144 inches long, so it covers typical countertop build-ups across a 12 foot run with one continuous decorative edge piece.
The molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can continue around corners and soft curves on the same countertop or work surface layout.
This IdealEdge molding uses an MDF core, so it provides a consistent substrate under the laminate face for bonding, trimming, and profiling around the finished edge of the laminate assembly.
The molding description notes a moisture barrier, so the edge construction is designed to help resist moisture exposure along the front and corners of laminate countertops and similar surfaces.
The recommended glue for this IdealEdge product is the AFF522 series, sold separately, so installers can use an adhesive family identified for bonding the molding to the substrate.
This Formica Corporation IdealEdge 6697-46 Argento Romano Etchings finish waterfall edge molding provides a coordinated way to finish laminate countertops, islands, desks, and work stations. The 1-1/2 inch by 144 inch laminate profile, MDF core, and moisture barrier construction are designed around common laminate fabrication. The suitability for straight, curved, clipped, and 90 degree edges supports continuous runs around complex layouts. With a 10 year limited warranty covering delamination of the edge, this molding suits projects where a defined decorative laminate edge solution is required.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |