Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Jamocha Granite bullnose gives laminate countertops, islands, desks, and work stations a finished look on all sides, so exposed edges visually match the surface and present a continuous decorative appearance on the project.
This laminate edge molding uses the Formica 7734-46 Jamocha Granite pattern in an Etchings finish, so the edge visually coordinates with Jamocha Granite laminate surfaces where a unified look is required across corners and runs.
The bullnose profile is designed as a decorative laminate edge molding, so it softens the transition from horizontal to vertical surfaces and provides a rounded front edge suited to residential or commercial work surfaces.
The molding height of 1-1/2 inches is sized for typical countertop and work surface edge conditions, so installers can cover the substrate edge while aligning visually with common laminate build-ups.
This product is classified by Formica Corporation under its IdealEdge line of decorative edge moldings, and it is supplied as a single 12-foot length, which supports longer runs and reduces joints along extended edges.
This Formica IdealEdge bullnose molding is intended for bonding with a recommended glue from the AFF522 series, sold separately, so installers can select an adhesive system that Formica specifies for securing the edge to the substrate.
The 1-1/2 inch profile height sets the reference for trimming and substrate preparation, so substrate thickness and laminate build-up can be planned so that the bullnose covers the vertical edge without overhangs or short reveals.
Because the molding is suitable for straight, curved, clipped, and 90 degree edges, it supports layout sequences where installers shape the substrate first, then apply the IdealEdge to follow those shapes around the perimeter.
The 12-foot length format means longer countertop and work surface runs can be handled with fewer joints, so planning cuts along the length can concentrate seams where they are less visible in the final installation.
This Formica IdealEdge laminate edge molding is specified for use on countertops, islands, desks, and work stations, so it addresses a wide range of horizontal surfaces where a decorative laminate edge is required on visible sides.
On countertops, the 1-1/2 inch bullnose height helps cover the exposed edge of the build-up, so the transition from top surface to front face reads as a continuous Jamocha Granite design rather than an exposed core.
In island applications, the ability to finish all sides means perimeter edges around the island can use the same Jamocha Granite Etchings finish, so visual lines remain consistent even where multiple sides are exposed to view.
Desks and work stations benefit from the same IdealEdge approach, because work surfaces often show both front and side edges, and this molding is designed to give a finished look on all sides across those edges.
The Formica 7734-46 Jamocha Granite pattern gives these surfaces a coordinated edge treatment when matched with Jamocha Granite laminate tops, so pattern alignment from surface to edge supports a unified appearance.
The moisture barrier MDF core under the decorative Jamocha Granite surface is designed as part of the laminate edge molding structure, so edge sections are constructed to handle typical moisture exposure from everyday use.
Because the profile is suitable for straight, curved, clipped, and 90 degree edges, installers can route or cut substrates to these shapes and expect the IdealEdge molding to follow those geometries around corners and returns.
The 12-foot length provides continuous coverage for longer edges on countertops, islands, or desks, so joints can be minimized, supporting smoother visual lines and fewer transitions along the bullnose profile.
The recommended use of AFF522 series glue, sold separately, gives installers a manufacturer-identified adhesive system for bonding the IdealEdge to the substrate, which supports consistent bond performance when applied correctly.
Formica Corporation associates this molding with a 10 year limited warranty covering delamination of the edge, so the laminated layers in the bullnose structure are backed for a defined period against separation under covered conditions.
The manufacturer part number 077342046D12000 and description IdealEdge, Jamocha Granite, 1.5 Bullnose identify this exact configuration, so specifiers and installers can reference the same edge molding across orders and drawings.
This Formica IdealEdge laminate edge molding is designed for use on countertops, islands, desks, and work stations, so it covers typical laminate work surfaces where exposed edges are visible.
The IdealEdge Jamocha Granite bullnose molding is 1-1/2 inches high and 144 inches long, so it spans standard countertop edges and many island or desk runs in a single length.
This IdealEdge molding is suitable for straight, curved, clipped, and 90 degree edges, so it can be applied around corners, arcs, and angled sections on countertops and work surfaces.
The Formica IdealEdge Jamocha Granite molding uses a moisture barrier MDF core, so the internal structure is designed to resist moisture exposure in normal countertop and work station environments.
This IdealEdge bullnose is recommended for use with AFF522 series glue, sold separately, so the bonding step can follow a Formica-identified adhesive system during installation.
This Formica IdealEdge molding carries a 10 year limited warranty that covers delamination of the edge, so the layered construction is backed against separation for a defined period.
The Formica IdealEdge 7734-46 Jamocha Granite Etchings finish bullnose molding provides a 1-1/2 inch high, 12 foot long laminate edge solution for countertops, islands, desks, and work stations where a finished look on all sides is required.
With suitability for straight, curved, clipped, and 90 degree edges, a moisture barrier MDF core, and a 10 year limited warranty covering delamination, this IdealEdge profile aligns to projects that specify Jamocha Granite laminate and need coordinated edges.
For jobs using Formica Corporation laminate in the 7734-46 Jamocha Granite pattern, selecting this IdealEdge molding allows the same decorative design and Etchings finish to carry over the edge treatment on visible surfaces.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |