Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Sea Pearl is a laminate edge molding from Formica Corporation that gives a finished look on all sides, so a countertop or work surface reads as one continuous surface instead of showing a dark seam. This molding has a 1-1/2 inch high profile, which builds a substantial front edge line that matches typical laminate top build-ups in many shops. The 144 inch, or 12 foot, length lets installers run long edges such as kitchen counters, islands, or reception tops with fewer joints, reducing layout time around seams. The profile is an ogee shape, which introduces a shaped transition from the deck to the edge, often used when a project calls for a more detailed front than a square edge. The Sea Pearl Scovato finish matches Formica laminate with the same pattern and finish, which helps the edge visually blend into the top.
This IdealEdge laminate edge molding uses a moisture barrier MDF core, which supports machining, shaping, and edge finishing in typical shop environments while providing a barrier layer against routine moisture exposure at the front edge. The edge is designed to be bonded using a recommended glue, identified as the AFF522 series, so the glue chemistry is matched to this laminate edge application. Using a glue series specified for this product supports bond strength along the full 144 inch length and around curved or clipped sections. The 1-1/2 inch H profile dimension matters when planning substrate build-up, because it drives how the core and deck meet at the front, as well as how much material can be eased or flushed during finishing.
This laminate edge molding is described for use on countertops, islands, desks and work stations, so it aligns with both residential and commercial laminated work surfaces where an exposed front edge needs a finished profile. On a kitchen or breakroom countertop, the 12 foot length allows long runs along cabinets or peninsulas while keeping the Sea Pearl pattern consistent from one end to the other. On islands, the suitability for straight, curved, clipped and 90 degree edges lets an installer carry the same ogee edge detail around corners, clipped ends, or gentle radius shapes without changing to another edge treatment. On desks and work stations, the 1-1/2 inch profile builds a defined front edge that visually matches the deck laminate in Sea Pearl Scovato finish, so the whole unit presents as one coordinated surface.
The moisture barrier MDF core in this Formica IdealEdge Sea Pearl profile supports consistent machining of the ogee shape, which helps shops cut, miter, or cope edges with predictable tool response and clean transitions between pieces. Because the molding gives a finished look on all sides, installers can expose returns or ends without additional capping, which saves steps when finishing open ends on islands, desks, or work stations. The stated suitability for 90 degree edges means the ogee front can be carried cleanly around outside corners, supporting repeatable corner geometry and visual continuity. The recommended AFF522 series glue is identified for this edge, which guides adhesive selection toward a system designed to hold the laminate molding securely to its substrate in normal countertop and work surface use. The 10 year limited warranty that covers delamination of the edge signals that the product is engineered for long-term bond performance under typical laminate top conditions, reducing the risk of edge failure over time.
Formica IdealEdge Sea Pearl is a laminate edge molding from Formica Corporation that provides a finished ogee front edge to match Sea Pearl Scovato laminate on countertops and similar work surfaces.
This IdealEdge laminate edge molding is for use on countertops, islands, desks and work stations, so it fits typical laminated work surfaces in kitchens, offices, and similar spaces.
The Formica IdealEdge Sea Pearl molding has a 1-1/2 inch high profile and a 144 inch, or 12 foot, length, which suits standard countertop edges and longer runs.
The moisture barrier MDF core provides a stable, machinable base for the ogee profile and offers barrier performance against routine moisture at the front edge of countertops and work surfaces.
The Formica IdealEdge Sea Pearl molding lists the AFF522 series as the recommended glue, which aligns the adhesive system with the laminate edge application for bond performance.
This IdealEdge Sea Pearl molding carries a 10 year limited warranty that covers delamination of the edge, tying the product to long-term bond performance expectations in normal use.
The Formica IdealEdge Sea Pearl ogee molding pairs a 1-1/2 inch profile with a 12 foot length, which aligns with common countertop build-ups and long runs on islands, desks, and work stations. Its suitability for straight, curved, clipped and 90 degree edges lets one profile handle mixed conditions across a project. With a moisture barrier MDF core, Sea Pearl Scovato finish, and a 10 year limited warranty that covers delamination of the edge, this molding is positioned for laminate top work where a coordinated front edge and long-term bond performance both matter.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |