Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Sea Pearl bullnose is a laminate edge molding designed to give countertops, islands, desks, and work stations a finished look on all sides. The 1-1/2 inch profile sets a consistent visual height along the edge, which helps projects line up with adjacent cabinetry and surfaces. The 144 inch length lets installers run long, continuous edges, which reduces seams along straight runs. This IdealEdge molding has a Sea Pearl 9534-34 Scovato finish surface that visually matches that finish in Formica laminate, so the edge and top read as one coordinated surface. The laminate edge construction is part of Formica Corporation's Laminate Edge Moldings, which supports jobs where a decorative edge is needed instead of a raw laminate edge. A moisture barrier MDF core sits under the decorative surface to help the edge stand up in typical countertop and work station environments where moisture contact is possible.
This Formica IdealEdge 9534-34 Sea Pearl molding is a bullnose edge profile used to finish the exposed edge of countertops, islands, desks, and work stations. The laminate edge molding format works with straight, curved, clipped, and 90 degree edges, so installers can carry the 1-1/2 inch profile around corners and radiused sections while maintaining the same visual line. The MDF core under the laminate is engineered with a moisture barrier, which matters at sink areas and other locations where water contact happens during normal use. Recommended glue for this edge molding is the AFF522 series, sold separately, which gives installers a specific adhesive family to pair with the laminate edge during fabrication. This focused match between profile, finish, core, and adhesive reference helps streamline shop setup when repeating projects using Sea Pearl tops.
This Formica IdealEdge Sea Pearl bullnose edge molding is intended for use on countertops, islands, desks, and work stations, so it fits common shop and field projects in kitchens, offices, and similar spaces. The ability to handle straight, curved, clipped, and 90 degree edges lets fabricators run one edge style through corner turns, peninsula returns, and rounded ends without changing profiles. With its 1-1/2 inch profile height and 144 inch length, the molding suits long counter faces, extended work surfaces, and large islands that benefit from minimal seams. The Sea Pearl 9534-34 Scovato finish surface is designed so tops laminated in that pattern can use this edge molding to bring the same look down over the edge, which keeps the finished installation visually consistent from horizontal to vertical faces.
The laminate edge molding design of this IdealEdge product means the decorative surface wraps the MDF core, creating a defined bullnose shape that stays consistent from piece to piece, which supports repeatable fabrication in production shops. The moisture barrier MDF core adds resistance in wet-prone locations such as near sinks or in busy work stations, helping the edge stay stable in typical service conditions. A 12 foot length supports layout planning because fewer joints are needed along the front edge of long runs, which can reduce layout time when cutting and fitting pieces to template sizes. The 10 year limited warranty focused on delamination of the edge reflects expectations around bond performance over time, which is important for installers building tops meant to remain in service for many years. Recommended AFF522 series glue, sold separately, gives a clear reference point for adhesive selection when bonding this Formica edge molding to the substrate in shop settings.
This Formica IdealEdge Sea Pearl bullnose molding is for countertops, islands, desks, and work stations, so it suits common horizontal work surfaces where a finished laminate edge is required.
This IdealEdge 9534-34 Sea Pearl bullnose molding is 144 inches long, which lets installers cover many standard runs with a single continuous edge piece for fewer seams.
This Formica edge molding has a 1-1/2 inch profile height, which covers typical countertop build-up thickness and creates a substantial bullnose edge appearance along the front.
This IdealEdge laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so it works around corners, radiused ends, and standard front edges on the same project.
This Formica IdealEdge Sea Pearl molding uses a moisture barrier MDF core, which supports the laminate surface in typical countertop and work station environments where moisture is present.
This IdealEdge Sea Pearl 1-1/2 inch bullnose molding has a recommended glue, sold separately, identified as the AFF522 series, giving fabricators a referenced adhesive family for bonding.
This Formica IdealEdge 9534-34 Sea Pearl Scovato finish bullnose edge molding aligns with projects using Sea Pearl laminate on countertops, islands, desks, and work stations. The 1-1/2 inch profile, 144 inch length, moisture barrier MDF core, and laminate edge molding design support fabricators building coordinated tops with a continuous decorative edge. For jobs moving through Wurth Baer Supply, this product fits into laminate and surfacing workflows where a defined, Sea Pearl matched bullnose edge is required along straight, curved, clipped, and 90 degree edges.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |
