Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 9534-34 Sea Pearl gives a finished look on all sides, so exposed laminate edges on countertops, islands, desks, and work stations present as a continuous surface instead of a raw edge. This double radius edge molding uses an MDF core, providing a stable substrate under the laminate profile that supports clean machining and consistent adhesion along the length. The 1-1/2 inch profile height covers standard laminate build-ups, which helps visually tie the deck surface and edge together. The Sea Pearl Scovato finish matches Formica laminate in the same design and finish, so the edge visually aligns with the top for a coordinated appearance. The edge molding is suitable for straight, curved, clipped, and 90 degree edges, which lets you run one style around corners, soft arcs, and inside returns on the same job. The 12 foot length reduces seams on longer runs, helping keep joints away from high-wear areas.
This Formica IdealEdge Sea Pearl molding is designed for use on countertops, islands, desks, and work stations, so its dimensions and profile are set up for those laminate assemblies. The MDF core gives you a consistent material to bond to the deck with adhesive along the full 12 foot length. The product is suitable for straight, curved, clipped, and 90 degree edges, which means it can be formed around outside corners and gentle curves in a layout. Recommended glue is the AFF522 series, sold separately, which provides a tested bond line between the core and the substrate, helping support edge retention under normal service loads.
This laminate edge molding is specified for use on countertops, islands, desks, and work stations, so it directly fits common commercial and residential laminate layouts. The 1-1/2 inch profile height lets it cover the edge build-up typically found at the front of a laminate countertop, supporting a continuous appearance from deck to edge. Because it is suitable for straight, curved, clipped, and 90 degree edges, the same Sea Pearl Scovato profile can run across long straight stretches, turn outside corners, and follow gentle curves on island or desk fronts. The 12 foot length helps installers place joints where they work best for the design, such as at inside corners, instead of being forced to break on open runs.
The MDF core with a moisture barrier is engineered to sit under the laminate profile, which supports edge stability after gluing in typical countertop and work surface environments. When bonded with the recommended AFF522 series glue, sold separately, the core and substrate work together to resist edge movement that could otherwise affect alignment. The double radius profile creates two rounded faces, reducing edge chipping risk in day-to-day contact compared with a sharp square edge. The Sea Pearl Scovato finish is matched to its corresponding Formica laminate, so alignment of color and texture from deck to edge helps finished tops present as a single surface. The 10 year limited warranty covering delamination of the edge underscores the manufacturers expectation that the bond between laminate and core remains intact throughout normal service life.
The molding is 1-1/2 inches high and 144 inches long, so it spans standard laminate countertop build-ups and allows long runs with fewer seams on islands, desks, and work stations.
The product is a double radius edge molding, creating rounded transitions on both exposed sides that reduce sharp corners on countertops, islands, desks, and work stations.
The molding is for use on countertops, islands, desks, and work stations, so its dimensions and profile are aimed at laminate work surfaces in those applications.
The molding is suitable for straight, curved, clipped, and 90 degree edges, so it can follow long runs, gentle curves, and outside corners in one project layout.
The edge molding uses an MDF core with a moisture barrier, giving the laminate profile a stable, protected base in normal countertop and work station conditions.
The recommended glue is the AFF522 series, sold separately, which is specified for bonding this MDF core edge molding to suitable substrates in countertop and similar installations.
This Formica IdealEdge 9534-34 Sea Pearl double radius molding combines a 1-1/2 inch profile, 12 foot length, and MDF core with a moisture barrier to support laminate work on countertops, islands, desks, and work stations. The Sea Pearl Scovato finish and matching profile help tops read as one coordinated surface from deck to edge, while the suitability for straight, curved, clipped, and 90 degree edges supports varied layouts. For your next laminate project requiring a finished Sea Pearl edge, this molding aligns design, height, and length for efficient fabrication.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |
