Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Cordless 2-Tool Combo Kit 20V MAX gives you a PCC600 lithium ion drill/driver and a PCC640 lithium ion impact driver in one setup, so you can drill and drive on the same job without swapping tools, which keeps cabinet and shop work moving efficiently. The 20V MAX lithium ion platform powers both tools, so one battery type serves the entire kit, which simplifies charging on site. The kit uses PCC680 lithium ion compact batteries, which keep overall tool weight down, easing overhead or extended drilling tasks. A PCC690 lithium ion charger supports the battery system, so you can return packs to service between tasks. A kit bag keeps the tools together for transport between shop and job. A double-ended bit tip and #2 PH drive bit support common fastening tasks, so basic driving operations can start immediately in woodworking and general construction settings.
The PCC600 1/2 inch metal ratcheting chuck provides a strong mechanical grip on round and hex shank bits, which supports accurate hole sizing and reduces re-tightening during repetitive drilling. The two speed 0-400 and 0-1,600 RPM gear box lets you match speed to task, using the lower range for controlled screw driving into cabinets and casework and the higher range for drilling pilot or clearance holes in wood. The PCC640 impact driver uses a one handed easy load 1/4 inch hex chuck, which allows quick bit swaps when shifting between different screw sizes or head styles. The compact designs of both tools support working in cabinets, under counters, or around assemblies where space is limited, which is common in woodworking and installation work. Battery fuel gauges on both tools show remaining charge, which supports planning which packs to cycle back to the PCC690 charger between tasks.
The PCCK602L2 combination tool kit is categorized as a woodworking power tool solution, which aligns it with cabinet, furniture, and general shop tasks where drilling and driving are frequent. The PCC600 drill/driver with its compact design suits interior cabinet work, such as drilling pilot holes for hinges or driving screws in case assemblies where maneuvering a larger drill would be difficult. The 1/2 inch metal ratcheting chuck on the PCC600 handles common woodworking bit sizes, supporting a range from small pilot bits to larger hole-making tasks. The PCC640 impact driver, with 1,495 inch/lb of torque, is suited to driving longer or larger screws often found in framing, ledger attachment, or heavy cabinet mounting to studs. Its 0-2,900 RPM and 0-3,100 BPM operation pairs speed with impact action, helping maintain screw drive in denser materials typically encountered around wood structures.
The PCC600 two speed 0-400 and 0-1,600 RPM gear box helps deliver repeatable results by letting you run slower for controlled seating of screws, which reduces overdriving fasteners in cabinet parts, then switch to higher speed for consistent drilling performance. The metal ratcheting chuck maintains bit grip under load, which supports accurate, repeatable hole sizes when you are running a series of bores across panels. The PCC640 impact driver torque rating of 1,495 inch/lb provides consistent driving force, which helps seat structural or long screws to a similar depth without excessive effort. Its 0-2,900 RPM and 0-3,100 BPM operation stabilizes driving in tougher grain sections, which supports uniform fastening in repetitive assembly work. Both tools use the same 20V MAX lithium ion PCC680 compact batteries, and the battery fuel gauges display remaining charge, which supports planning battery rotation so drilling and driving sequences stay consistent through the workday. The PCC690 lithium ion charger serves the battery system, supporting regular charge cycles that keep the tools ready for repeated tasks.
The Cordless 2-Tool Combo Kit 20V MAX has a PCC600 lithium ion drill/driver and a PCC640 lithium ion impact driver, providing both drilling and driving capability on the same 20V MAX system.
The PCC600 drill/driver two speed gear box with 0-400 and 0-1,600 RPM settings supports controlled screw driving at low speed and faster drilling at high speed for typical woodworking jobs.
The PCC600 1/2 inch metal ratcheting chuck grips bits firmly under load, which helps prevent slipping and supports accurate holes when drilling or driving in wood materials.
The PCC640 1,495 inch/lb torque rating indicates strong driving force, which helps when running longer or larger screws into wood where extra power is beneficial.
The PCC640 one handed easy load 1/4 inch hex chuck allows quick bit changes, which supports switching between driver bits frequently during fastening tasks.
Both tools have a battery fuel gauge that displays charge remaining in the battery, which helps schedule battery swaps around drilling and driving tasks to limit interruptions.
The PCCK602L2 20V MAX lithium ion 2-tool kit from Porter Cable Corporation combines a PCC600 drill/driver and PCC640 impact driver, along with PCC680 compact batteries and a PCC690 charger, giving woodworking and shop environments a matched drilling and driving setup built on one cordless system. When a project needs frequent pilot drilling, screw setting, and heavier driving in wood-based construction, this combination tool kit aligns those needs with defined speed, torque, and bit interface details, so you can match each tool to its strongest role and keep work moving efficiently from drilling to fastening.