Cabinet Claw Face Frame Clamp combines multiple steps of face frame cabinet installation into one process, so stile alignment and clamping happen together instead of as separate operations. This saves time on every run of cabinets where stiles need to be pulled tight and aligned. The clamp is designed for professional quality installation, which keeps joints looking clean for finished work. It installs two stiles from 1-1/2 inch to 2 inch width, so it covers common face frame dimensions used in many cabinet shops. The clamp handles up to 1-1/2 inch thickness for each stile, which suits heavier face frames without changing tools. A 4 inch opening capacity lets you work across the joint area while still reaching the faces. Protective rubber pads on the clamp faces and alignment plate cushion the cabinet surfaces, which helps reduce marking during clamping pressure.
This Pony Jorgensen cabinet clamp works within stile widths from 1-1/2 inch to 2 inch, so once the faces are milled to that range the clamp handles both narrow and slightly wider rails in the same run. The ability to handle up to 1-1/2 inch thickness for each stile means thicker stock can be brought together without changing clamping methods mid-job. A 4 inch opening capacity gives plenty of reach across the joint, letting the claws engage the faces while the alignment plate references the frame. Protective rubber pads on the clamp faces and alignment plate help maintain cabinet finish quality as pressure is applied. Aluminum claws and an aluminum alignment plate provide a firm structure, so the clamp holds its geometry while the face frame is drawn tight.
The Pony Jorgensen Cabinet Claw Face Frame Clamp sits directly on cabinet face frame stiles, bringing two pieces together in one motion. By combining multiple steps of face frame cabinet installation into one process, it replaces separate alignment and pull-up clamps with a single tool across the stile joint. The clamp installs two stiles from 1-1/2 inch to 2 inch width, so it works on many kitchen, bath, and shop cabinets that share those face frame dimensions. It supports up to 1-1/2 inch thickness for each stile, which lets it handle lighter frames and heavier builds with the same setup. With a 4 inch opening capacity, the clamp reaches across the joint area while still engaging enough surface to hold the faces steady. Protective rubber pads on the clamp faces and alignment plate sit between the metal structure and the cabinet, helping protect finished faces as pressure is applied during installation.
Each design detail of this cabinet stile clamp supports consistent, repeatable installations. The combined installation process means the same motion aligns and tightens the stiles, so each cabinet in a run follows the same sequence and reduces variation. The 1-1/2 inch to 2 inch stile width range defines a predictable window, making layout and milling choices match directly to the clamp capability. Handling up to 1-1/2 inch thickness for each stile keeps the clamping geometry similar whether the face frames are standard or heavy stock, which supports uniform joints across different projects. The 4 inch opening capacity gives room to work near the joint, so fasteners or adhesive can be applied while the clamp holds alignment. Protective rubber pads on the clamp faces and alignment plate help the clamp grip without marring, which is important when working on prefinished components. Aluminum claws and an aluminum alignment plate give the clamp a rigid frame, helping the clamping force transfer squarely into the face frame joint across repeated uses.
The Cabinet Claw Face Frame Clamp installs two stiles from 1-1/2 inch to 2 inch width, so it matches a common range of face frame dimensions used in many cabinet builds.
The clamp handles up to 1-1/2 inch thickness for each stile, allowing it to pull together both standard and heavier face frame stock within that thickness range.
The 4 inch opening capacity means the clamp can span up to 4 inches across the joint area, giving room to align faces while still accessing the work zone.
The clamp combines multiple steps of face frame cabinet installation into one process, so alignment and pull-together happen simultaneously, reducing time compared to traditional separate clamps.
Protective rubber pads on the clamp faces and alignment plate cushion cabinet surfaces, helping protect finished faces from marks while still allowing firm clamping pressure.
The aluminum claws and alignment plate provide a rigid structure for the clamp, helping keep the stiles aligned while pressure is applied during cabinet installation.
The Pony Jorgensen Cabinet Claw Face Frame Clamp 2 pack is built around the needs of face frame cabinet installation, combining multiple steps into one process that saves time. With a working window of 1-1/2 inch to 2 inch stile width and up to 1-1/2 inch thickness for each stile, it covers a wide slice of everyday cabinet work. A 4 inch opening capacity and an aluminum claw and alignment plate structure support firm, consistent clamping across the joint. Protective rubber pads on the clamp faces and alignment plate help protect cabinet finishes as pressure is applied. For shops and serious installers focused on aligning and pulling together face frame stiles efficiently, this clamp configuration offers a focused solution.
Sold In: 1 Package