Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 5349 series pullout mounts to the floor of a base cabinet and rolls two 35 quart white bins out on full-extension, soft-close slides, putting trash and recycling behind a door and within reach in one pull.
Running separate bins for waste and recycling in the same cabinet is the practical solution for a kitchen where counter space is already spoken for. This pullout handles both in one unit: the carriage rides out on the slides and both bins come forward together, so sorting at the counter means a short toss rather than a trip across the room. The full-extension travel means the back of each bin is as reachable as the front, so liners seat properly and nothing gets jammed at the rear. When the door closes, both bins disappear behind it.
The carriage is finished in aluminum with a powder coat and is sized to fit a cabinet opening of 15 inches wide, 22-3/8 inches deep, and 19-1/2 inches tall. The 85 pound capacity covers two bins loaded well past a typical kitchen cycle. The soft-close slides absorb the closing energy of a loaded carriage, which matters more with two full bins than it does with one: the combined weight is enough to slam an uncontrolled slide. The door-mount hardware lets the door drive the pullout so the carriage moves with the door rather than requiring a separate handle pull.
This is the right unit for a kitchen remodel or cabinet shop build where a 15-inch-minimum base cabinet is available and the homeowner or client wants a concealed two-stream waste solution with controlled motion. The double-bin layout suits families who separate trash and recycling daily. Cabinet shops and designers specifying for higher-use kitchens will find the aluminum carriage and 85 pound rated slides sized for realistic daily loads rather than light-duty use. The two white bins are included; a door-mount kit is needed if the carriage is to ride the door, and that kit is sold separately.
The cabinet opening needs to be at least 15 inches wide, 22-3/8 inches deep, and 19-1/2 inches tall. Measure all three before ordering since the depth and height minimums are as important as the width for a clean fit.
Two 35 quart white bins are included. Check the specific configuration for lid inclusion; lids are available as a separate purchase if not included with this unit.
The carriage is door-mount compatible, but the door-mount bracket is sold separately. Without it, the carriage operates independently from the cabinet door.
Two full 35 quart bins carry meaningful weight, and soft-close slides absorb that closing energy so the carriage settles in quietly rather than banging the cabinet frame. It also reduces wear on the slide hardware over time.
Choose this pullout to put trash and recycling behind a single cabinet door on an aluminum frame that handles the load, with soft-close slides that keep a fully loaded carriage under control every time it closes.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Roll |  RSCP-BAGROLL-1 Mfr# CP-BAGROLL-1 | Rev-A-Shelf Bins, Lids and Grommets, -CP-BAGROLL-1 | ||||
Sold in: 1 Package |  RSCP-FILTER-1 Mfr# CP-FILTER-1 | Rev-A-Shelf Carbon Filter 1/4"H, -CP-FILTER-1 |