8mm Brad Point Boring Bit For Clean Holes

8mm brad point boring bit describes an 8mm diameter bit that cuts with a brad point tip, so the center point locates the hole and the cutting spurs shear the edge, which matters when you want controlled starts and clean entry in boring operations. This high performance brad point boring bit is specified at 57mm, so the cutting length suits standard cabinet and furniture boring tasks where depth needs to be consistent job to job. The bit is identified as left hand, so it is designed for counterclockwise rotation, which matters on boring heads or spindles set up for left hand tools. Amana Tool is listed as the brand, so the bit matches shops already standardized on Amana boring tooling. The SAP description references DITEC 2000, tying this bit to that named line so purchasing can match it precisely by description and number.

Key Boring Bit Details That Support Production

• The 8mm diameter brad point design centers the cut, so the tip and spurs guide the bit into the workpiece, which matters when line boring or shelf pin drilling where hole location has to track accurately.
• The 57mm high performance cutting length is specified, so you have enough reach for common cabinet panels while still controlling flex, which matters when repeating holes across panels without wandering.
• The left hand designation means the bit is built for counterclockwise rotation, so it matches left hand spindles, which matters when loading it into multi-spindle boring machines with mixed rotation directions.
• The bit is listed for boring machines with a 10mm shank, so it fits 10mm boring chucks, which matters when matching existing industrial boring equipment on the shop floor.
• The description notes drill presses with a 3/8 inch shank, so this boring bit family covers that interface as well, which matters when aligning boring work between dedicated machines and drill presses.
• The note that it is not for portable drills or routers identifies its intended stationary use, which matters when planning workflows around fixed boring setups instead of handheld tools.

Mounting And Rotation Details For Accurate Boring

This high performance brad point boring bit is specified with a 10mm shank for boring machines, so the shank size mates directly with standard 10mm boring heads and collets, which matters when swapping bits without changing holders. The web description also refers to drill presses with a 3/8 inch shank version, so this bit type is part of a system that covers both 10mm and 3/8 inch interfaces, which matters when matching parts across different stations. The left hand rotation requirement, described as counterclockwise, means the cutting geometry is ground for that direction, which matters because correct rotation allows the brad point and spurs to cut cleanly instead of rubbing. The note stating not to use this tool in portable drills or routers defines it as a boring machine and drill press solution, which matters in planning stable, guided cuts rather than handheld operation.

Using This Left Hand Boring Bit In The Shop

Where This 8mm Brad Point Boring Bit Fits

The SAP description and web description specify this as an 8MM BRAD LH 57MM DITEC 2000 boring bit, so it is positioned for boring machines and drill presses handling Ditec 2000 line tooling, which matters when aligning part numbers with existing machine charts. The web description calls out boring machines with a 10mm shank, so it fits into 10mm boring spindles that are common on line borers, which matters in cabinet shops drilling rows of system holes. The same description references drill presses with a 3/8 inch shank version for that platform, so this boring bit style is used where work is set on a drill press table for vertical boring, which matters for smaller runs or specialty drilling. The brand listing as Amana Tool ties it to a recognized boring bit manufacturer, which matters when purchasing wants to match brand standards set across the shop.

How Left Hand Rotation Supports Repeatable Results

The product name states this is a left hand high performance brad point boring bit, and the web description clarifies that left hand tools rotate counterclockwise, so the cutting edges are ground for that rotation, which matters for achieving clean, predictable hole walls. When mounted on a left hand spindle in a boring machine with a 10mm shank interface, the bit rotates as specified, so the brad point centers the bit and the spurs score the outer edge first, which matters for minimizing tear-out on entry. Using the DITEC 2000 identified bit with the correct rotation also supports consistent performance across multiple holes because the geometry works as intended, which matters on large cabinet or fixture runs. The note excluding use in portable drills or routers focuses this bit on stable, guided equipment, so feed and alignment are managed by the machine, which matters when hole spacing must follow fixed fences or boring patterns.

Common Questions About This Amana Boring Bit

Select This 8mm Left Hand Bit For Boring Setups

This 8mm brad point boring bit from Amana Tool combines an 8mm diameter, 57mm length, left hand rotation, and 10mm shank boring machine interface, so it lines up with dedicated counterclockwise boring spindles. The same product family is identified for drill presses with a 3/8 inch shank version, so the geometry is established for stationary boring across multiple machine types. The SAP and manufacturer references link directly to 305008 and DITEC 2000, so purchasing and maintenance can track the exact bit used in production. For cabinet, fixture, or furniture shops standardizing on Amana boring tooling, this defined combination of size, rotation, and shank style supports consistent, repeatable boring work.