Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DeWalt 20V lithium ion impact driver gives you a compact 20 V MAX 1/4 inch driver for impact work where a full-size drill will not fit. The cordless design runs on lithium-ion batteries, so you get power without a cord across cabinet runs or benches. The compact and lightweight format is geared toward fitting in tight spaces, which helps when working inside casework or between framing. A belt hook keeps the driver at your side between fastenings, so you can move a ladder or clamp stock without setting it down on a surface. The LED work light on the driver puts light directly on the bit area, which helps when driving fasteners in low-light corners, toe-kicks, or under-counter spaces.
This DeWalt 20 V MAX lithium ion 1/4 inch impact driver is set up for cordless workflow on installation and shop tasks. The 20 V lithium-ion battery type keeps weight down compared to many older chemistries, which helps reduce strain over a day of driving fasteners. A maximum speed rating of 2,800 RPM allows the driver to spin bits quickly before impact action takes over, which helps start screws efficiently in pilot holes or anchors. Because the design is compact and lightweight, it is well suited to driving cabinet screws or hardware fasteners in cramped casework where clearance is tight. The belt hook keeps the driver within reach while you measure, mark, or adjust hinges, helping maintain a steady pace without repeatedly returning to a bench or cart.
The DeWalt DCF885C2 20 V MAX lithium ion 1/4 inch impact driver is oriented toward woodworking and installation tasks that need compact power. The compact and lightweight construction means the tool fits where larger drills struggle, such as inside cabinets, drawer bays, and closet assemblies. With cordless 20 V power, the driver supports work on built-ins and trim away from wall power, which simplifies layout in finished spaces. The 1/4 inch impact driver format works with standard hex-shank bits used for cabinet screws, structural fasteners, and hardware installation, allowing one driver to cover a wide range of fastening steps. The LED work light adds value when working under counters or inside cases by putting light exactly where the bit meets the material. The belt hook helps installers and shop staff move between work areas while keeping the driver ready for the next fastening cycle.
The DCF885C2 impact driver uses a 20 V MAX lithium-ion battery type, which supports consistent power delivery as you move through repetitive fastening tasks. A battery recharge time of 30 minutes shortens downtime between runs, which matters when multiple carcasses or sections must be fastened in sequence. The maximum speed of 2,800 RPM allows quick drive engagement, helping reduce time per screw when running longer fasteners into hardwoods or sheet goods. Because the tool does not use a hammer mode, its impact action is focused on driving rather than masonry drilling, which keeps control centered on screw and fastener work. The compact and lightweight design helps maintain control at awkward angles, supporting cleaner fastening in visible areas like face frames or exposed panels. The 3 year warranty on the kit supports ongoing use in a shop or field environment, tying the driver to long-term workflows rather than short-term projects.
The DeWalt DCF885C2 impact driver is described for woodworking and general fastening tasks, so it fits cabinet, trim, and installation work where a compact impact driver is useful.
The compact and lightweight design lets the driver fit into tight spaces and reduces bulk, which is useful inside cabinets, under counters, and in other confined work areas.
The DCF885C2 impact driver has a maximum speed of 2,800 RPM, which supports quick screw starting and faster fastening cycles during repetitive work.
The LED work light on the driver illuminates the bit area, improving visibility when driving fasteners in low-light or enclosed spaces such as cabinets or toe-kicks.
The 20 V MAX lithium-ion battery provides cordless power with a lighter weight profile, supporting portable use and reducing fatigue over extended fastening sessions.
The DCF885C2 impact driver kit specifies a battery recharge time of 30 minutes, which limits downtime between fastening runs in shop or field workflows.
The DeWalt DCF885C2 20 V MAX lithium ion 1/4 inch impact driver kit brings compact, cordless impact driving to woodworking and installation tasks. With its 2,800 RPM maximum speed, LED work light, and belt hook, it supports efficient fastening in cabinets, built-ins, and trim work. The 20 V MAX lithium-ion battery platform and 30 minute recharge time align with busy shop or field schedules where tools cycle constantly. With a 3 year warranty backing the kit, this impact driver is positioned as a practical choice for regular fastening work across woodworking projects.
Sold In: 1 Each