
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Self-Adhering Masking Film 0.4 mil Thickness x 12' x 200' is a Grip N Guard masking film roll designed to protect work areas during painting or dusty operations. The 0.4 mil thick construction provides added strength, so the film resists tearing as it is positioned over larger surfaces. The 12 foot width covers tall walls, cabinets, or fixtures in a single run, which reduces seams that can leak dust or overspray. The 200 foot roll length supports multiple jobs or large projects without frequent changeout. The film clings to just about any surface with minimal or no taping required, which streamlines setup and leaves more time for actual finishing work. By holding paint and dust particles 3.5 times better than other products, this film keeps more debris on the sheet instead of on surrounding areas. The material cuts to size as needed, letting installers trim custom pieces at the jobsite for better fit. The film is made in USA, aligning with domestic sourcing requirements.
This Grip N Guard self-adhering masking film uses a 12 foot x 200 foot roll format, so crews can pull continuous lengths across long runs such as walls or banks of cabinets. The 0.4 mil thickness provides added strength in a lightweight sheet, which helps the film stay intact when draped, repositioned, or cut on site. Because the film clings to just about any surface with minimal or no taping required, installers can press it into place over walls, furniture, or equipment to create quick barriers. This clinging behavior reduces the amount of edge taping needed, which simplifies work around corners and detailed profiles. The ability to cut the film to size as needed lets users fine-tune coverage around openings or fixtures using standard cutting tools already on the job.
The 12 foot width of the Grip N Guard self-adhering masking film suits areas that run from floor to ceiling, such as shop walls or tall cabinet banks, so a single sheet can span the full height. The 200 foot roll length supports repeated masking of work zones, which is useful in finishing rooms or recurring paint setups. Because the film clings to just about any surface with minimal or no taping required, it works on walls, furniture, and equipment where edge access might be limited. This clinging characteristic is especially helpful when building temporary dust barriers or overspray shields around woodworking operations. The film holds paint and dust particles 3.5 times better than other products, so surfaces near spray work or sanding stations stay cleaner as debris remains on the film instead of migrating. The 0.4 mil thick construction adds strength while still remaining manageable for a single installer to pull and position, supporting everyday use in shops and on job sites.
The 0.4 mil thickness of this masking film provides added strength, which means the sheet is less prone to punctures or blowouts when overspray or dust accumulates. By holding paint and dust particles 3.5 times better than other products, the film reduces the chance of debris escaping when sections are removed, supporting cleaner turnarounds between stages of work. Because the film clings to just about any surface with minimal or no taping required, installers can apply long lengths without stopping frequently to add tape, which leads to straighter, more consistent barriers. The 12 foot by 200 foot roll layout offers predictable coverage, making it easier to plan how much area can be masked before pulling a fresh section. Since the film cuts to size as needed, crews can tailor each piece around openings or equipment, which gives tight edges that help control dust spread. Being made in USA, the Grip N Guard film comes from a domestic source, aligning with project requirements that specify US-made shop and safety supplies.
The Self-Adhering Masking Film 0.4 mil Thickness x 12' x 200' provides a 12 foot wide sheet on a 200 foot roll, so installers can cover tall and long surfaces with fewer seams.
The 0.4 mil thick film offers added strength, helping it resist tearing while being pulled, positioned, or trimmed during masking work.
The Grip N Guard masking film clings to just about any surface with minimal or no taping required, which speeds installation across walls, furniture, or equipment.
The masking film holds paint and dust particles 3.5 times better than other products, helping keep overspray and fine dust contained during and after work.
The film cuts to size as needed, so installers can trim sections for windows, cabinet faces, or equipment profiles directly from the roll.
The Grip N Guard self-adhering masking film is made in USA, supporting projects that call for domestically produced shop and safety supplies.
The Self-Adhering Masking Film 0.4 mil Thickness x 12' x 200' from Grip N Guard combines a 0.4 mil thick sheet, 12 foot width, and 200 foot roll length to support efficient masking on larger or repeated projects. Its ability to cling to just about any surface with minimal or no taping required shortens prep time, while the film holds paint and dust particles 3.5 times better than other products to keep work areas cleaner. Because the material cuts to size as needed and is made in USA, it fits both project layout needs and domestic sourcing standards.
Sold In: 1 Roll