Berenson Tempo Series 12-5/8" (320 mm) Center to Center Modern Brushed Gold Pull, - 0828-2MDB-P
Description
Tempo Pull 320mm Center To Center For Cabinets
Tempo pull 320mm center to center describes a Berenson Tempo Series cabinet pull with a 12-5/8 inch (320 mm) center to center, so hole spacing lines up for handles on wider cabinet doors or drawers. The pull has an overall length of 15 inches, giving ample hand clearance across the front of the cabinet face. Its 1-1/4 inch projection sets the handle off the surface, which creates comfortable grip space while opening heavier doors. The 1/2 inch width provides a slim profile that suits transitional layouts without looking oversized on standard fronts. A 3/8 inch base diameter keeps the contact point compact, which helps when aligning the pull on narrower rails or stiles. The pull is made from steel in a Modern Brushed Gold finish, bringing a metallic look that ties into brushed gold decorative hardware programs.
Key Tempo Series Pull Details For Projects
- The 12-5/8 inch (320 mm) center to center dimension sets consistent mounting hole spacing, which matters when laying out multiple doors or long drawer banks in a straight line.
- The 15 inch length gives the pull a wider gripping area, which is useful on large cabinet doors or wide drawers that benefit from a hand hold closer to each end.
- The 1-1/4 inch projection holds the handle away from the cabinet face, which helps fingers clear door edges during use in tight kitchen or shop runs.
- The 1/2 inch width keeps the profile lean, which helps the pull sit visually balanced on both narrow and full-overlay fronts without overwhelming the door or drawer face.
- The 3/8 inch base diameter at each end concentrates the contact point, which supports precise alignment to layout marks along rails, stiles, or drawer fronts.
- The steel construction with Modern Brushed Gold finish delivers a metallic appearance, which supports projects built around modern brushed gold decorative hardware themes.
Modern Brushed Gold Pull Mounting And Fit
This Berenson Tempo Series pull uses a 12-5/8 inch (320 mm) center to center measurement, which sets the distance between mounting points when marking and drilling cabinet faces. The 15 inch overall length extends slightly beyond that span, which means the bar overhangs each mounting point for a balanced look on large doors. A 1-1/4 inch projection establishes how far the pull stands off the door or drawer, which influences knuckle clearance when mounted near edges or adjacent fronts. With a 1/2 inch width, the pull covers a narrow strip across the surface, which matters when laying out on slim rails. The Modern Brushed Gold finish defines the visible surface, which lets the pull visually coordinate with other brushed gold handles and pulls on the same run.
Where This Berenson Tempo Pull Works Best
Tempo Series Transitional Cabinet Pull Use Cases
The Berenson Tempo Series 12-5/8 inch (320 mm) center to center pull suits cabinet applications that call for a transitional style handle in a Modern Brushed Gold finish, because its design is defined as Tempo and its style is listed as Transitional. The pull falls under Handles and Pulls in Decorative Hardware & Moldings, so it is intended for cabinet and casework fronts where a graspable handle is required. Its 15 inch length makes it a practical option for long drawer fronts or taller doors that benefit from a long gripping bar across the face. The 1/2 inch width keeps the visual line slim, which works well in layouts that combine narrow doors with wider drawers while maintaining a consistent handle profile.
Details That Support Consistent Layout And Operation
The 12-5/8 inch (320 mm) center to center measurement helps installers repeat exact hole spacing along a run, which reduces layout variation when multiple pulls are mounted in series on upper and lower cabinets. The 3/8 inch base diameter focuses each mounting point into a compact footprint, which aids in aligning the pull to pencil lines or templates without covering layout marks. Because the projection is 1-1/4 inches, the pull stands out enough from the surface to allow a firm grip, which is useful on heavier cabinet doors and loaded drawers. The steel material provides a solid substrate under the Modern Brushed Gold finish, which supports a uniform feel when the handle is grasped. The finish itself is specified as Modern Brushed Gold, which ties this pull into projects that use similar brushed gold tones across other handles and pulls from Berenson Corporation.
Common Questions About This Tempo Cabinet Pull
What are the key dimensions of this Tempo pull?
The Berenson Tempo Series pull has a 12-5/8 inch (320 mm) center to center, 15 inch length, 1-1/4 inch projection, 1/2 inch width, and a 3/8 inch base diameter, which guides drilling and visual layout.
How does the 320mm center to center help cabinet layouts?
The 320 mm center to center dimension sets repeatable hole spacing for this pull, which supports straight alignment across multiple cabinet doors or long drawer banks using the same measurement.
What material and finish are used on this pull?
The pull is made from steel with a Modern Brushed Gold finish, which provides a metallic cabinet handle surface matching other modern brushed gold decorative hardware.
How far does this Berenson pull stand off the cabinet?
This Berenson Tempo pull has a 1-1/4 inch projection, which sets the handle away from the cabinet face to give hand and finger clearance when operating doors or drawers.
What cabinet style does the Tempo Series pull suit?
The pull is identified as Tempo Collection with a Transitional style, which positions it between traditional and contemporary cabinet aesthetics in kitchens or other casework.
Which screw size is specified for this cabinet pull?
The Web Description lists screw size 8-32 x 1 inch, which indicates the thread and length used when fastening the pull through standard cabinet door and drawer fronts.
Select This Pull For Modern Brushed Gold Projects
The Berenson Tempo Series 12-5/8 inch (320 mm) center to center Modern Brushed Gold pull brings a steel construction, a 15 inch length, and a 1-1/4 inch projection to cabinet work, which supports consistent layouts on larger doors and drawers. Its Transitional style, 1/2 inch width, and 3/8 inch base diameter give a lean profile suited to decorative hardware runs planned around Modern Brushed Gold finishes. For projects sourced through Wurth Baer Supply, this pull aligns with Handles and Pulls in Decorative Hardware & Moldings, which lets it drop into cabinet hardware schedules needing this specific Berenson 0828-2MDB-P configuration.
