Berenson Tempo Series 8-13/16" (224 mm) Center to Center Modern Brushed Gold Pull, - 0825-2MDB-P
Description
Berenson Tempo Series Pull For Cabinet Projects
Berenson Tempo Series pull gives cabinets a transitional look by pairing the Tempo collection design with a Modern Brushed Gold finish, so it works on jobs calling for a balance between traditional profiles and modern metal tones. The pull uses steel construction, which provides a solid metal feel during use and supports repeated daily opening and closing on frequently used fronts. With an 8-13/16 inch (224 mm) center to center dimension, this pull spans wider drawer and door faces, helping visually anchor larger fronts while matching common drilling patterns. The 11-3/16 inch overall length extends beyond the mounting holes, giving more grip area for hands and easier access when clients grasp from different angles. A projection of 1-1/4 inch spaces fingers away from the cabinet surface, which helps reduce knuckle contact on thicker doors and drawer fronts.
Key Berenson Tempo Details That Support Workflow
- The 8-13/16 inch (224 mm) center to center layout sets consistent hole spacing, which simplifies drilling jigs across a run of doors and drawers and helps keep hardware alignment uniform from cabinet to cabinet.
- The 11-3/16 inch overall length provides extended pull coverage across the face, which helps scale the hardware proportionally on wider drawer fronts and creates a more continuous visual line on banks of cabinets.
- The 1-1/4 inch projection defines the standoff from the face, which gives enough clearance for fingers behind the pull while helping keep the profile tight enough for narrow walkways along cabinet runs.
- The 1/2 inch width concentrates the gripping surface, which allows a firm pinch grip along the bar and supports consistent hand placement on both drawers and doors in the same installation.
- The 3/8 inch base diameter at each post sets a compact footprint, which keeps the contact area neat on the door or drawer face and works cleanly with narrow stiles or rail widths.
- The 8-32 x 1 inch screw size matches a standard machine thread, which supports straightforward drilling and tapping into prepared cabinet fronts using familiar bits and drivers.
Tempo Pull Fit, Size, And Hole Layout Details
The 8-13/16 inch center to center measurement defines the distance between mounting points, so layout lines and boring patterns can be set precisely before installation. This spacing matches a 224 mm metric pattern, which helps coordinate with templates and jigs marked in either metric or imperial scales on shop benches. The 11-3/16 inch overall length positions the ends of the pull past the mounting holes, so installers can visually align the bar with drawer or door edges while the screw locations stay fixed. A projection of 1-1/4 inch sets how far the pull sits off the face, which affects both hand clearance and how far hardware extends into the walkway in tight kitchen or bath layouts.
Using The Berenson 0825-2MDB-P Pull In Cabinet Runs
Where This Steel Modern Brushed Gold Pull Works
This Tempo pull from Berenson Corporation belongs to the Handles and Pulls product class, so it is suited to cabinet and furniture fronts within decorative hardware applications. The Transitional style bridges classic and contemporary lines, which works on projects where door profiles might be more traditional while finish choices move toward modern metals. Its Modern Brushed Gold finish ties into jobs specifying warm metallic tones, letting the pull coordinate with other brushed gold decorative hardware and moldings in the same space. The 8-13/16 inch (224 mm) center to center dimension suits wider cabinet doors and drawers, so it can be used as the primary hardware on base cabinets, tall pantry fronts, or larger furniture pieces that need longer pulls.
Details That Support Consistent Installation Results
The steel material provides a sturdy structure for the pull, which supports repeated operation on high-use fronts without flex during opening and closing. The 224 mm center to center drilling dimension works with shop jigs designed around common European spacing, which helps installers repeat bore locations quickly across a full kitchen or bank of casework. The 3/8 inch base diameter keeps the post footprint tight, which allows careful placement within narrow rails or near panel details without crowding raised or recessed profiles. A 1/2 inch bar width and 1-1/4 inch projection define the handhold geometry, which helps create predictable finger clearance and grip across every cabinet in the run. The Modern Brushed Gold finish identifies the specific visual tone in the Tempo collection, which helps designers and installers coordinate this pull with other Berenson Tempo Series decorative hardware for a consistent finished look.
Common Questions About Tempo Pull 224mm Center To Center
What are the key dimensions of the Berenson Tempo Series pull?
The Berenson Tempo Series pull has an 8-13/16 inch (224 mm) center to center, 11-3/16 inch overall length, 1-1/4 inch projection, 1/2 inch width, and 3/8 inch base diameter, which defines drilling layout and hand clearance.
How does the 224mm center to center measurement help installation?
The 224 mm center to center spacing sets a precise distance between mounting holes, which aligns with common cabinet hardware templates and helps repeat drilling positions across multiple doors and drawers.
What material and finish does the 0825-2MDB-P pull use?
The 0825-2MDB-P pull is made from steel with a Modern Brushed Gold finish, which provides a solid metal feel and a brushed gold appearance within the Tempo collection.
How does the 1-1/4 inch projection affect cabinet use?
The 1-1/4 inch projection sets how far the pull extends from the door or drawer face, which provides finger clearance behind the bar while keeping the profile relatively low.
What style and collection is this Modern Brushed Gold pull part of?
This Modern Brushed Gold pull is part of the Tempo collection and has a Transitional style, which positions it between traditional and contemporary cabinet hardware looks.
What screw size does this Berenson Tempo pull use?
This Berenson Tempo pull uses 8-32 x 1 inch screws, which matches a standard cabinet hardware thread and length for mounting through typical door and drawer fronts.
Selecting This Pull For Your Next Cabinet Job
The Berenson Tempo Series pull in Modern Brushed Gold combines a Transitional style profile with steel construction, so it fits decorative hardware projects that need a solid metal pull and a brushed gold finish. With a 224 mm (8-13/16 inch) center to center layout and 11-3/16 inch overall length, it matches wider cabinet fronts and common drilling patterns in shop or field work. For projects built around the Tempo collection and warm brushed gold hardware, this 0825-2MDB-P pull gives a consistent size, finish, and layout to carry across doors and drawers on your next cabinet run.