Berenson Tempo Series 12-5/8" (320 mm) Center to Center Polished Chrome Pull, - 2006-2026-P

Berenson Tempo Pull 320mm For Cabinet Projects

Berenson Tempo pull 320mm describes a steel cabinet handle from the Tempo collection that uses a 12-5/8 inch (320 mm) center-to-center hole spacing, which helps align with long drawer or door layouts that follow this common drilling pattern. The polished chrome finish provides a bright, reflective surface, which supports transitional style projects that bridge traditional and contemporary cabinet designs. The handle length of 15 inches gives generous grip area, which helps users open wider or heavier fronts comfortably. A projection of 1-1/4 inch sets the pull off the face of the cabinet enough to clear fingers, which supports practical everyday use. The 1/2 inch width and 3/8 inch base diameter keep the profile slim, which can help visually lighten large drawer banks while still defining a clear pull point for the user.

Key Tempo Series Pull Details For Planning

• The 12-5/8 inch center to center dimension sets the screw hole spacing, which matters when drilling new fronts or matching existing 320 mm layouts across multiple cabinets.
• The 15 inch overall length provides extended hand contact area, which can help distribute pull force more evenly on wider drawers or tall doors during regular operation.
• The 1-1/4 inch projection establishes working clearance off the cabinet face, which supports comfortable finger access without the pull feeling overly proud on the door or drawer.
• The 1/2 inch width creates a lean profile on the front, which can help maintain clean sight lines across aligned pulls in kitchens, baths, or casework runs.
• The 3/8 inch base diameter defines the footprint at the mounting points, which matters when centering the pull on narrow rails or when covering previous smaller handle marks.

Installation Dimensions For Tempo Series Polished Chrome Pull

The 12-5/8 inch center to center measurement on this Berenson Tempo Series polished chrome pull sets the exact distance between fastening points, which simplifies layout when marking drilling templates or programming boring equipment. With an overall length of 15 inches, the handle extends slightly beyond the hole span at each end, which helps visually center the pull on wide drawer faces while keeping the mounting points structurally closer to the middle. The 1-1/4 inch projection positions the gripping surface forward, which can help fingers clear decorative door profiles or slightly raised panel edges during use. The 1/2 inch width and 3/8 inch base diameter combine to create a balanced contact area, which supports secure mounting on both narrow and wider rails without overwhelming the cabinet front.

Using This 12-5/8 Inch Berenson Tempo Pull

Where This Cabinet Pull Works Effectively

This Berenson Tempo series 12-5/8 inch center to center polished chrome pull is identified as a handle within the decorative hardware and moldings category, which positions it for use on cabinet doors and drawers in woodworking projects. The transitional style designation means the pull is suited to installations that blend straight lines with softer details, which helps it coordinate across mixed door styles in the same room. The polished chrome finish adds a reflective surface on the steel material, which works well where a bright metal accent is part of the design scheme. Because the pull length is 15 inches with a 320 mm mounting span, it is suited to wider fronts where a longer handle provides scale and ergonomic reach along the drawer or door edge.

Details That Support Consistent Mounting Results

The 320 mm center to center Berenson 2006-2026-P pull gives a precise mounting distance, which supports repeatable drilling setups when installing multiple handles across a run of casework. The 1-1/4 inch projection defines how far the grip stands off the door or drawer face, which helps create consistent hand clearance from one cabinet to the next. The 1/2 inch width controls the visual thickness of the handle, which supports alignment when multiple pulls are placed side by side on tall pantry doors or stacked drawers. The 3/8 inch base diameter sets the contact circle at each mounting point, which helps cover the immediate area around each hole while keeping the footprint tight for a clean transitional look. Together, these fixed dimensions help installers plan layouts that repeat accurately across kitchen, bath, or built-in cabinetry using this specific pull.

Common Questions About Berenson Tempo Pull 320mm

Select This Tempo Pull For 320mm Layouts

This Berenson Tempo pull 320mm center to center gives a defined 12-5/8 inch mounting span, a 15 inch overall length, and 1-1/4 inch projection, which together support consistent, comfortable cabinet operation. The steel construction with polished chrome finish and transitional style designation allow this handle to work across a range of cabinet designs where a bright, streamlined pull is desired. When a project calls for a 320 mm center to center handle with these specific dimensions, this Tempo Series option from Wurth Baer Supply offers a clearly identified choice.