Berenson Hearthstone Series Brushed Nickel 18" (457 mm) Center to Center Appliance Pull, -2168-1BPN-P

Berenson Hearthstone Appliance Pull For Large Doors

Berenson Hearthstone appliance pull is an 18 inch center to center handle designed for appliance-scale or larger cabinet doors, so it spans wider panels and creates a substantial gripping area for confident door operation. The pull is part of the Hearthstone collection, tying into a consistent design family when matching other handles on the same project. Its traditional style shapes the profile with classic lines, helping it blend into more formal or timeless kitchen layouts. The zinc material forms the body of the pull, giving it a solid metal construction that supports everyday handling on heavy fronts. A brushed nickel finish covers the pull, softening reflections and coordinating with many brushed fixtures across the space. Overall length of 19-1/4 inches means the pull extends slightly beyond the mounting centers, which visually balances tall or wide fronts for a proportional, finished look.

Key Hearthstone Pull Details For Project Planning

• The 18 inch center to center drilling creates a long, two-bolt mounting pattern that suits appliance fronts or oversized cabinet doors where a larger hand grip is needed.
• An overall length of 19-1/4 inches means each end projects beyond the mounting holes, giving extra presence on tall doors and helping the pull appear correctly scaled to wider panels.
• The pull projects 1-5/8 inches off the surface, providing finger clearance between the door face and the handle so hands can wrap the pull comfortably without rubbing the door.
• A base diameter of 1-3/8 inches spreads the load at each contact point, which helps distribute pulling forces across more surface area on the mounting face.
• The 1-1/16 inch width through the grip area creates a substantial cross-section, so the pull feels solid in hand and offers a broad surface to grasp on heavier doors.

Installation Geometry And Mounting Fit Details

The 18 inch center to center dimension defines the mounting hole spacing, guiding drilling locations on appliance panels or large cabinet doors for accurate alignment. With a projection of 1-5/8 inches from the mounting surface, the handle stands off far enough to clear typical door edge profiles while still keeping the grip close for efficient reach. The 1-3/8 inch base diameter at each end establishes the footprint around the fastener area, which helps set expectations for how much flat surface the door or panel should provide. A width of 1-1/16 inches through the grip influences where the handle can sit near adjacent components, helping avoid crowding when multiple pulls line up on wide installations. The Hearthstone series identity ties this pull to a recognizable Berenson collection, which supports consistent layout decisions when placing multiple handles across aligned doors.

Using This Brushed Nickel Appliance Pull In Projects

Where The Hearthstone Appliance Pull Works Best

This pull belongs to the Hearthstone collection in Berenson decorative hardware, placing it in a family intended for coordinated cabinet and appliance fronts. The traditional style classification means it suits kitchens, bars, or built-ins that lean toward classic rather than ultra-minimal profiles, so it pairs well with paneled or detailed doors. As an appliance pull in the Berenson product class, it is sized for larger facings where its 18 inch center to center drilling aligns with appliance-style layouts. The brushed nickel finish lets this pull sit comfortably alongside other brushed nickel components, helping tie together hinges, faucets, or lighting in the same finish tone across a room.

Why The Dimensions And Material Support Consistent Results

The zinc material provides a metal base for the pull, supporting a sturdy grip that suits the repeated pulling cycles seen on appliance doors and frequently used cabinets. The brushed nickel finish over that zinc surface shapes both appearance and feel, giving a smooth, muted sheen that hides minor fingerprints better than highly reflective finishes in everyday use. A 19-1/4 inch overall length combined with the 18 inch center to center spacing creates proportional margins at each end of the pull, which helps installers visually align the hardware with panel stiles or decorative framing. Projection of 1-5/8 inches sets a consistent stand-off across multiple doors when several Hearthstone pulls are used in a row, keeping grips aligned in depth. The 1-3/8 inch base diameter at each mounting point defines a clear bearing area around the fastener locations, helping the pull sit flush against the door face for a uniform look. The 1-1/16 inch width along the handle body contributes to a comfortable hand feel, giving ample contact area when pulling heavier fronts during daily operation.

Common Questions About This Hearthstone Appliance Pull

Selecting This Pull For Appliance-Scale Fronts

The Berenson Hearthstone appliance pull in brushed nickel pairs its 18 inch center to center drilling with a traditional style profile, making it suited to appliance fronts or oversized cabinet doors that need a longer, substantial handle. Zinc construction under a brushed nickel finish delivers a unified metal piece that coordinates visually with other brushed nickel hardware across a project. With its 19-1/4 inch overall length, 1-5/8 inch projection, 1-3/8 inch base diameter, and 1-1/16 inch width, this pull offers defined geometry for layout on large panels. For projects where consistent hardware sizing and finish are important, this Hearthstone series pull provides a clearly specified option.