Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Meadow pull 128mm graphite identifies this Berenson Meadow Series cabinet pull as a 5-1/16 inch center to center handle in a transitional style, so it suits projects that blend traditional and contemporary cabinet lines. The aluminum construction provides a metal pull that keeps weight down on doors and drawers, which helps when working on large banks of cabinets. The graphite finish delivers a dark, muted tone that hides hand contact better than bright finishes, useful on heavily used kitchen or shop fronts. With a total length of 6-5/8 inches, the pull extends slightly past the drilling centers for comfortable grasping along its bar. A projection of 1-3/8 inches sets the hand clearance off the face frame or panel, supporting a firm, knuckle-clear grip. The 11/16 inch width and 1/2 inch base diameter give a proportional footprint that looks balanced across both narrow and wider drawer fronts.
This Berenson Meadow Series pull uses a 5-1/16 inch center to center dimension, matching the 128 mm metric standard, so it fits common cabinet boring patterns in both inch and millimeter layouts. The 6-5/8 inch overall length means the handle visually spans a wider area than the drilling centers, which creates a substantial look on full-overlay doors and larger drawers. A projection of 1-3/8 inches holds the gripping surface off the cabinet face, aiding finger clearance when opening doors near adjacent obstacles. The 11/16 inch width gives the bar enough surface for fingers to pull without feeling sharp or thin, helpful on heavy drawer boxes. A 1/2 inch base diameter sets a defined footprint at each mounting point, which provides a clean transition from door face to handle body on both flat and routed fronts.
This Meadow series cabinet pull from Berenson Corporation is part of the Decorative Hardware & Moldings category under Handles and Pulls, so it is intended for use on cabinet doors and drawers. The 5-1/16 inch center to center drilling pattern suits mid-size and larger cabinet fronts, where a substantial handle spans the rail or panel comfortably. Its transitional style means it can be used in kitchens, baths, or built-in storage that mix straight lines with softer profiles, giving hardware continuity across varied door designs. The graphite finish offers a dark, understated look that pairs effectively with light painted cabinets as a contrast, or with darker stains for a more blended appearance. Because the pull length is 6-5/8 inches, it also serves well on base cabinet drawers that see frequent use, offering an extended gripping area across the front.
The 128 mm, or 5-1/16 inch, center to center dimension provides a precise drilling reference, which is important for installers using jigs or line-boring systems on multiple cabinets. This consistent spacing means fronts can be swapped or reordered later while keeping the same hole pattern, supporting long-term service work. The aluminum construction gives each pull a predictable weight, which helps doors and drawers operate with a uniform feel across the run. With a projection of 1-3/8 inches, the pull stands off the face enough to clear typical door profiles and moldings, reducing contact between fingers and finished wood surfaces during use. The 11/16 inch width concentrates the hand contact along a comfortable bar, which helps users get a solid grip on wide, loaded drawers. The clearly identified manufacturer part number 2281-4GPH-P and SAP description "MEADOW PULL 128MM CC GRAPHITE" allow accurate specification on drawings and purchase lists, reducing errors when ordering for larger projects.
The Berenson Meadow Series pull has a 5-1/16 inch, or 128 mm, center to center dimension, so hole spacing follows a common cabinet hardware pattern in both inch and metric layouts.
The Berenson 2281-4GPH-P Meadow pull has a total length of 6-5/8 inches, giving it a visual span that works well on mid-size and larger cabinet doors or drawers.
This graphite cabinet pull has a projection of 1-3/8 inches, setting the handle far enough off the cabinet face to support comfortable finger clearance when opening fronts.
The Meadow pull is made from aluminum with a graphite finish, giving a metal handle with a dark, muted appearance suited to many cabinet color schemes.
The pull has a width of 11/16 inch, providing a bar wide enough for a solid grip while still looking streamlined on cabinet fronts.
Each mounting base on this pull has a 1/2 inch diameter, creating a defined footprint where the handle meets the cabinet surface.
The Berenson Meadow Series 5-1/16 inch center to center graphite pull combines an aluminum body, a transitional style profile, and a 128 mm drilling pattern, so it supports consistent hardware alignment across cabinets. At 6-5/8 inches long with a 1-3/8 inch projection, it offers comfortable hand clearance and a substantial presence on doors and drawers. The graphite finish and 11/16 inch width create a balanced look that works across many cabinet colors. For projects that call for repeatable sizing and a clearly identified part number, the 2281-4GPH-P Meadow pull is a practical fit for detailed cabinet layouts.
