Berenson Meadow Series 6-5/16" (160 mm) Center to Center Graphite Pull, - 2282-4GPH-P

Berenson Meadow Graphite Pull For Cabinets

Berenson Meadow graphite pull uses a 6-5/16 inch (160 mm) center to center layout, so it spans common cabinet and drawer hole patterns while giving plenty of hand clearance. The pull is part of the Meadow Collection in a transitional style, which helps it bridge traditional and contemporary cabinet designs in one consistent look. Its aluminum material keeps the pull light while still providing a solid feel when operating doors and drawers. The graphite finish gives a dark, understated appearance that contrasts well with many door and drawer surfaces. Overall length is 7-7/8 inch, so the pull extends beyond the mounting holes for a balanced visual footprint. A projection of 1-3/8 inch brings the handle far enough off the front for fingers to wrap comfortably. The 11/16 inch width presents a slim front profile that still offers a defined gripping surface.

Key Meadow 160mm Pull Details In Use

• The 6-5/16 inch (160 mm) center to center dimension positions the mounting points on standard cabinet layouts, helping align this pull with existing drilling patterns on doors or drawer fronts for straightforward changeouts or new work.
• The 7-7/8 inch overall length creates a longer visual line across the front, which spreads the pulling force over more surface area and can suit wider drawers or taller doors where a short pull might look undersized.
• The 1-3/8 inch projection holds the grip away from the cabinet face, giving fingers room behind the pull for a comfortable grasp while opening and closing, which is useful on heavier fronts or high-use cabinets.
• The 11/16 inch width provides a narrow, clean front view while still giving enough surface depth for consistent finger placement, supporting repetitive use without feeling too bulky on smaller doors.
• The 1/2 inch base diameter creates a compact footprint at each mounting point, which can sit neatly on narrow stiles or rails and keeps the transition between pull and cabinet face visually tight.
• The transitional style of the Meadow Collection allows this pull to pair with a range of cabinet door profiles, supporting mixed-kitchen or multi-room projects that need a single handle style to tie them together.

Mounting And Fit Details For Meadow Pull

This Meadow 160mm center to center pull uses two mounting points spaced 6-5/16 inch apart, which supports precise alignment along cabinet rails or drawer fronts. The aluminum material keeps overall weight down, which can simplify handling during layout and fastening. With a projection of 1-3/8 inch, the pull holds away from the door or drawer front enough to clear typical finger depth without crowding tight spaces. The 1/2 inch base diameter concentrates the contact area at each hole, which can sit cleanly on both narrow and wider frame members. Its 7-7/8 inch overall length helps visually center the pull on medium to large fronts, supporting consistent spacing from panel edges. The graphite finish provides a dark tone on the mounting bases and grip, which can visually frame the contact points against lighter surfaces.

Using The Meadow Aluminum Pull In Projects

Where This Meadow 160mm Pull Works Best

The Meadow aluminum drawer pull with 160 mm center to center spacing suits cabinet doors and drawers that need a moderate-length handle with a slim look. Its 7-7/8 inch length helps it sit proportionally on common kitchen, bath, or shop fronts that are neither very small nor extra wide. The 6-5/16 inch hole spacing gives room between fasteners, which can be useful on wider drawer faces where shorter pulls may feel crowded. With 1-3/8 inch projection, the pull stands off the surface enough for comfortable grip on thicker or heavier doors. The 11/16 inch width maintains a narrow appearance, helping it blend into front designs without dominating the panel. The graphite finish brings a dark, muted color that can contrast with light cabinets or harmonize with darker finishes, giving flexibility when coordinating across multiple rooms.

Why These Meadow Pull Details Support Consistency

The Berenson Meadow cabinet pull uses a defined 6-5/16 inch (160 mm) center to center measurement, which supports consistent drilling jigs and repeatable spacing across a run of doors and drawers. Its aluminum construction keeps each pull light, which can reduce strain when handling many pieces during installation. The 1/2 inch base diameter fixes a small, repeatable footprint at every mounting location, supporting even reveals and uniform sightlines across a bank of fronts. The 1-3/8 inch projection and 11/16 inch width combine to form a grip profile that feels similar from cabinet to cabinet, which can help users find the pull edge quickly by feel. The transitional style from the Meadow Collection helps designers carry one pull design through different cabinet profiles, keeping trim, slab, or framed doors visually tied together. The graphite finish supplies the same dark tone across all pulls in this part number, helping large projects maintain color consistency from piece to piece.

Common Questions About Berenson Meadow Pull

Selecting This Meadow Pull For Your Project

Berenson Meadow graphite pull with 160 mm center to center spacing brings a defined set of working dimensions to cabinet and drawer fronts. Its aluminum construction, 7-7/8 inch overall length, and 1-3/8 inch projection support comfortable operation across repeated openings. The 11/16 inch width and 1/2 inch base diameter create a controlled footprint that suits many door and drawer layouts. With a transitional Meadow Collection style and graphite finish, this pull offers a single part number that can cover varied cabinet profiles while keeping a unified look. For projects needing consistent hole spacing, a slim profile, and a dark, understated handle appearance, this Meadow pull aligns closely with those requirements.