Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the cabinet member half of Pro Value Series' PRO 2.0 side-mount ball-bearing slide, sized at 14 inches for shallower drawers where a full-size member would crowd the cabinet interior. Order it when you need the cabinet-side rail only — whether you're replacing a worn member, building out a run of cabinets one component at a time, or matching a previously installed drawer member.
The 14 inch length suits cabinet bays with a shallow interior depth: narrow bathroom vanity drawers, desk pedestals, small upper cabinets with pull-out trays, and shorter utility drawers where a longer member would bottom out against the rear panel. Full extension means everything stored at the back of the drawer is reachable without reaching inside. This is a standard-motion member — no self-close ramp, no soft-close damper — so the drawer stays wherever it is left. That is the right choice for applications where a closing mechanism would add friction or conflict with a push-to-open retrofit on the matching drawer front.
The cabinet member is formed steel with a zinc electroplate — the same functional finish used across the PRO 2.0 ball-bearing program. Zinc plating protects the steel from the normal humidity and handling of a dry indoor cabinet environment. It is not a decorative finish and is largely hidden once the drawer is in place. For an environment with regular moisture exposure or washdown, a stainless slide program is the appropriate choice instead.
Cabinet shops running high volumes sometimes stock cabinet members and drawer members as separate line items so they can pick and build without waiting on paired packaging. Service and repair work is another common scenario: one member fails or a slide is lost during a renovation, and replacing the cabinet-side rail alone gets the drawer running again without discarding a good drawer member. This member also covers builds where the drawer box and cabinet are staged separately before final assembly, with each component ordered to the specific bay count.
No — this listing is the cabinet member only. Order the matching 14 inch drawer member separately to complete a working pair.
The 100 lb rating applies to a complete pair of slides — one cabinet member and one drawer member installed on the same drawer.
It can, but face-frame installations typically require rear mounting brackets to support the back end of the slide. Those brackets are sold separately and must be matched to the PRO 2.0 series.
No. This is a standard-motion slide with no closing mechanism. The drawer stays in whatever position it is left — open, closed, or anywhere in between.
A 14 inch cabinet member in zinc keeps a shallow drawer running smoothly without over-specifying the hardware — practical, correctly sized, and ready to pair with the drawer member that completes the install.
Sold In: 120 Each