Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 14 inch drawer member for the Pro Value Series PRO 2.0 side-mount ball-bearing slide system — a full-extension, 100 lb rated component in a zinc-finished steel construction, designed for side-mount installations in face-frame and frameless cabinetry.
The drawer member is the inner component that attaches directly to the drawer box and telescopes out of the cabinet member when the drawer opens. This 14 inch member suits shallower cabinet runs — base cabinets with a reduced interior depth, wall cabinet drawers, and smaller utility drawers in shop or office casework. At full extension, the entire drawer box clears the cabinet face, so items stored at the back are reachable without digging. This is a replacement or system-build component: it pairs with the matching 14 inch Pro Value Series cabinet member to form a working pair. Order both members for each drawer position.
Steel construction with a zinc finish protects against everyday humidity and the minor moisture exposure typical in dry indoor cabinet work. Zinc is a functional, understated finish — it is not a decorative choice, since this member rides inside the cabinet and is not visible when the drawer is closed. The ball-bearing system uses hardened steel balls running in formed steel raceways, which maintains smooth movement over years of daily cycling. This is a standard-motion slide: no soft-close damper, no self-closing ramp, no detents. The drawer stays wherever it is left, which suits utility and shop applications where mechanisms would add unnecessary complexity or cost.
Cabinet shops building out base cabinets with shallower drawer runs reach for the 14 inch member when a longer slide would crowd the cabinet interior. It also fits renovation and repair work — a direct replacement for a worn or damaged drawer member in an existing Pro Value Series installation without replacing the cabinet member already mounted in the case. The 100 lb class handles most residential kitchen and bath loads as well as light commercial casework. The non-handed design is a practical advantage when ordering in volume: there is no left or right to sort, so pulls from the bin go straight to the bench.
This listing is for the drawer member only — the single component that mounts to the drawer box. You need two drawer members (one per drawer side) plus two matching 14 inch cabinet members to complete one drawer installation.
Yes, with the appropriate rear mounting support. In a face-frame cabinet the cabinet member's back end needs a rear bracket or socket to hold it level — confirm you have the matching rear hardware before installing in framed construction.
Build the drawer box 1 inch narrower than the cabinet opening to leave 1/2 inch of clearance on each side for the slides.
No — the Pro Value Series drawer member is engineered to work within the Pro Value Series system. Do not mix it with cabinet members from other brands or series; the raceway geometry and disconnect are system-specific.
The 14 inch zinc drawer member gives shops and contractors a dependable full-extension component at a practical price point — sized for shallower runs, rated for real loads, and designed to drop into the system without handed sorting or special hardware.
Sold In: 120 Each