CompX Timberline Lock StealthLock Power Cord, 5-1/2' Length - RL-AP1

CompX StealthLock Power Supply For Continuous Use

CompX Timberline StealthLock power supply provides low voltage power from a standard 120v outlet directly to StealthLock Receiver Latches, so the locks run on line power instead of batteries during regular cabinet or fixture operation. This unit is described as an auxiliary continuous power supply transformer, which means it is designed to keep StealthLock receivers energized without relying on periodic battery changes. The product has a 5-1/2 foot cord, giving workable reach from the 120v outlet to the receiver location in typical millwork, display, or cabinet layouts. Because the transformer is specifically described as low voltage, the receiver side of the run operates on reduced voltage, which suits the StealthLock system design and separates the line-voltage plug side from the latch location in the cabinet structure.

Key Power Details That Support StealthLock Jobs

• The auxilliary continuous power supply transformer feeds StealthLock Receiver Latches, so they stay powered during daily use instead of cycling through batteries, which supports longer service intervals on lock installations.
• The transformer plugs into any 120v outlet, allowing use in typical North American shop, commercial, or residential spaces where standard receptacles are already present near casework or display fixtures.
• The low voltage design on the output side supplies power suitable for StealthLock receivers, so the line-voltage plug remains at the wall while only reduced voltage reaches into cabinet cavities.
• The 5-1/2 foot cord length between transformer and connection point provides flexibility to route the lead from the outlet toward the StealthLock receiver area while working around framing, shelving, or other components.
• The transformer is identified for use with StealthLock Receiver Latches, so it fits into jobs that specify StealthLock magnetic key and keyless locks rather than unrelated lock systems.

Power Cord Setup For StealthLock Installation Layouts

The stated 5-1/2 foot cord gives installers a defined span from the 120v outlet to the StealthLock Receiver Latch area, which helps when planning outlet placement relative to cabinets or fixtures. Because the unit plugs into a standard 120v outlet, it integrates into common electrical layouts where receptacles are already available near the millwork. The low voltage transformer output means only reduced voltage is run toward the receiver, aligning with StealthLock system requirements and allowing the line-voltage connection to stay at the wall. By providing continuous power to the StealthLock Receiver Latch, this power supply removes the need for batteries, so the lock can be set up as a plug-in powered solution rather than a battery-dependent installation.

Using This RL-AP1 Power Cord In Lock Projects

Where This StealthLock Power Cord Fits Best

This CompX Timberline auxilliary continuous power supply transformer is intended to power StealthLock Receiver Latches, so it fits projects that specify the StealthLock magnetic key and keyless lock system. The low voltage transformer plugs into any 120v outlet, so it suits cabinets, cases, and fixtures placed along standard wall receptacles in shops, offices, or retail installations that use North American line voltage. The 5-1/2 foot cord length supports runs from the outlet location to StealthLock receivers mounted within nearby cabinetry, allowing routing around backs, dividers, or bases while staying within the described reach.

Why Continuous Low Voltage Power Helps StealthLock Performance

The power supply is described as a continuous power transformer for StealthLock Receiver Latches, which means it provides steady low voltage instead of relying on intermittent battery capacity, supporting consistent lock operation over time. The description states that it removes the needs for batteries, so installers can set up StealthLock receivers as plug-in powered components when line power is preferred. The unit is also noted as able to power up to 10 Receiver Latches when used with the RL-APC Power Cords, allowing multiple StealthLock receivers on one transformer in jobs where several lock points are grouped on a single cabinet run or fixture bank. Because it is part of the CompX Timberline StealthLock system and identified by manufacturer part number RL-AP1, it provides a defined, repeatable way to deliver low voltage power to these receivers on projects that standardize around StealthLock hardware.

Common Questions About The RL-AP1 Power Cord

Select RL-AP1 For Powered StealthLock Installations

The CompX Timberline RL-AP1 auxilliary continuous power supply transformer offers low voltage power for StealthLock Receiver Latches from any 120v outlet, so StealthLock projects can operate without batteries. The 5-1/2 foot cord length and ability to power up to 10 Receiver Latches when used with RL-APC Power Cords support multi-door or multi-drawer layouts on shared runs. For jobs built around the StealthLock magnetic key and keyless lock system, this RL-AP1 power cord provides a defined way to implement continuous, plug-in power to the receivers.