Description
Jorgensen Clamp Pads For EZ Hold Steel Bar Clamps
Jorgensen Clamp Pads are replacement pads designed for Jorgensen 3700, 3700-LD and 33600 Series EZ Hold Steel Bar Clamps, so they refresh the working faces of those clamps and keep projects protected during clamping. The pads are described as non-marring, which means they contact the work without marking the surface, helping finished or pre-sanded parts leave the clamps in ready-to-move condition. They are also described as non-sticking, so adhesive squeeze-out or finishes are less likely to bond to the pad surface, helping the clamp release from glued joints more cleanly. The pads are further described as non-slipping, which supports steady clamping pressure at the contact point instead of the pad shifting under load. Each pack provides 4 round pads and 4 U-shaped pads, so the pad geometry matches various clamp contact areas on the listed Jorgensen bar clamp series.
Key Clamp Pad Details For Woodworking Projects
- Clamp pads are specified for Jorgensen 3700, 3700-LD and 33600 Series EZ Hold Steel Bar Clamps, so installers using those clamp series can match the pads directly to the intended tools on the bench or jobsite.
- The pads are described as non-marring, which protects surfaces on woodworking pieces during clamping, helping keep edges, faces and finished panels free of imprint lines from the bar clamps.
- The non-sticking description means glue or finish on the workpiece is less likely to adhere to the pad, supporting cleaner release after curing and reducing time spent cleaning clamp contact areas between glue-ups.
- The non-slipping description indicates the pads hold their position against the work, helping maintain steady clamping pressure on joints, laminations or assemblies without the pad skidding along the surface.
- Each pack contains 4 round pads and 4 U-shaped pads, so users can match pad shapes to different clamp contact points on the supported Jorgensen series and keep multiple clamps in service at once.
Clamp Pad Fitment And Replacement Use
These BAR CLAMP PADS are described for Jorgensen 3700, 3700-LD and 33600 Series EZ Hold Steel Bar Clamps, so they serve as purpose-built pads when refreshing those specific clamps. Using the pads on those named series keeps contact faces consistent with the original design of the EZ Hold Steel Bar Clamps during replacement. The mix of round pads and U-shaped pads in each pack allows installers to match pad geometry to the different bearing points on the compatible clamps when swapping out worn pads. Because the pads are non-marring, non-sticking and non-slipping, replacing old pads with this set restores those surface-contact characteristics on the clamp heads, supporting predictable clamping behavior over repeated use.
Where These Clamp Pads Work And Why Details Matter
Clamp Pads For Jorgensen 3700, 3700-LD And 33600
The web description specifies these clamp pads for Jorgensen 3700, 3700-LD and 33600 Series EZ Hold Steel Bar Clamps, so they are intended to operate on that family of Pony Jorgensen steel bar clamps in woodworking or related clamping tasks. Using pads described for those exact series keeps the working contact aligned with the clamp head layout on these EZ Hold Steel Bar Clamps, supporting consistent force transfer from the bar to the work surface. The SAP description lists them as BAR CLAMP PADS, tying their role directly to bar clamp applications rather than general hand tools, so crews using Jorgensen bar clamps can align these pads with that specific category of equipment. The product name identifies them as Jorgensen Clamp Pads with manufacturer part 7437, giving installers a clear reference when selecting pads to match existing Pony Jorgensen bar clamps across multiple clamps on a job.
The pack contains 4 round pads and 4 U-shaped pads, which means the set addresses different pad contact shapes used on the specified Jorgensen clamp series, helping each clamp contact point receive a pad that fits its bearing surface. This combination of pad shapes supports consistent coverage on both straight and profiled clamp faces within the 3700, 3700-LD and 33600 Series EZ Hold Steel Bar Clamps, so the clamping pressure is distributed across the designed surface area. Having multiple pads in the set lets users service several clamps in the same series, so the bar clamp fleet can maintain similar contact characteristics across all tools during assembly runs or repeated glue-ups.
Non-Marring, Non-Sticking, Non-Slipping Pad Performance
The web description states these clamp pads are non-marring, which indicates the contact material is intended to avoid marking the work surface, supporting clean faces on cabinet parts, trim pieces and panel components clamped with Jorgensen bar clamps. This non-marring behavior matters when clamping pre-finished or final-sanded parts, because the pads are described as helping the work leave the clamp without pad-imprinted dents or lines. The pads are also described as non-sticking, so joints with adhesive or finishes are less likely to bond to the pad surface at the clamp head, which aids in removing the clamp from cured assemblies without disturbing the joint.
The same description calls the pads non-slipping, which relates directly to maintaining stable pressure during clamping, because a pad that resists slipping helps the applied force stay directed at the intended contact spot. This non-slipping characteristic supports consistent compression along joints or laminations when tightening EZ Hold Steel Bar Clamps in the 3700, 3700-LD and 33600 series. Together, the non-marring, non-sticking and non-slipping descriptions define how the pads behave at the work interface, shaping how the clamps interact with workpieces during glue-ups, dry-fits and assembly steps where surface condition and stable pressure are important. With these behaviors restored by new pads, Jorgensen bar clamps in those series can continue to deliver predictable contact conditions over repeated clamping cycles.
Common Questions About Pony Jorgensen Clamp Pads
Which Jorgensen bar clamps use these clamp pads?
These clamp pads are specified for Jorgensen 3700, 3700-LD and 33600 Series EZ Hold Steel Bar Clamps, so they match those clamp families when refreshing pad surfaces.
What does non-marring mean for these clamp pads?
These clamp pads are described as non-marring, meaning they contact the work surface without marking it, which supports clean faces on finished or pre-sanded parts during clamping.
How do non-sticking clamp pads help during glue-ups?
These clamp pads are described as non-sticking, so adhesive or finish is less likely to bond to the pad, aiding clamp removal from glued joints after curing.
Why is non-slipping behavior important on clamp pads?
These clamp pads are described as non-slipping, which helps them hold position under load so clamping pressure stays focused where the bar clamp is tightened.
How many pads are provided in one clamp pad pack?
Each clamp pad pack has 4 round pads and 4 U-shaped pads, so different pad geometries can be fitted to multiple contact points on the supported Jorgensen bar clamp series.
What is the manufacturer part number for these clamp pads?
The manufacturer part number for these Pony Jorgensen clamp pads is 7437, which identifies this specific BAR CLAMP PADS set for ordering and inventory.
Select Jorgensen Clamp Pads For Targeted Bar Clamp Use
Choosing these Jorgensen Clamp Pads with manufacturer part 7437 targets clamp pad replacement on Jorgensen 3700, 3700-LD and 33600 Series EZ Hold Steel Bar Clamps, so pad geometry and behavior match those series. The non-marring, non-sticking and non-slipping descriptions define how the pads interact with work surfaces, supporting clean contact and steady pressure on assemblies. With 4 round pads and 4 U-shaped pads in a pack, multiple clamps in the specified Jorgensen series can be refreshed together for consistent clamping contact across ongoing woodworking or assembly work.
