Schwinn 2389 Series appliance pull is a matte gold handle designed as an appliance pull in the Schwinn 2389 family. This pull uses a 320 mm center to center dimension, which helps align with appliance panel drilling layouts that follow this metric spacing. The overall length of 12-5/8 inches gives you a substantial gripping area, which supports confident operation of appliance fronts. The pull is described as clean, modern, and understated, so it suits design-driven kitchens where hardware should coordinate without dominating the cabinet faces. As a Schwinn original design, the profile is specific to this series, which matters when matching existing Schwinn 2389 handles on surrounding doors and drawers. The product sits in the decorative hardware and moldings category under handles and pulls, signaling its role as visible front-of-cabinet hardware.
This appliance pull uses a 320 mm center to center mounting pattern, which defines exactly where mounting points align along the panel face. That fixed spacing matters during layout when planning drilling on appliance fronts in relation to door edges, cabinet reveals, and appliance panel dimensions. The 12-5/8 inch total length ties into that pattern by extending the pull beyond the mounting points, which influences where hands land when approaching from different angles. As an appliance pull within the Schwinn 2389 series, this piece is specified for use on appliance fronts rather than small cabinet doors, which keeps its scale appropriate to larger panels. The combination of matte gold finish and the described clean, modern, understated design also affects how it visually fits into contemporary kitchen lines.
This Schwinn Hardware appliance pull is classified as an appliance pull within decorative hardware and moldings, indicating its role on appliance fronts in kitchen or similar built-in environments. The 320 mm center to center dimension aligns with appliance-scale hardware patterns rather than small door pulls, which suits larger refrigerator or dishwasher panel fronts in a run of cabinetry. Its placement in the handles and pulls category clarifies that this part functions as the primary gripping component on the front surface, influencing how users interact with the appliance. The 12-5/8 inch overall length works with that classification by spanning a broader section of the panel, which supports a natural reach point whether the user approaches from the side or straight on. Because it belongs to a versatile family of handles in seven lengths, this appliance pull can sit visually at the top of the size range while shorter family members carry the same design language across adjacent doors and drawers.
The description of this Schwinn 2389 Series matte gold appliance pull as clean, modern, and understated shapes how it performs in contemporary cabinet layouts. That styling helps the hardware visually align with flat-front doors, appliance panels, and simple reveals where hardware is meant to complement rather than distract. The handle construction from zamak with a dark nickel finish in the product description indicates a metal substrate with a specified finish, which influences both weight in the hand and the look of the surface over time in normal interior conditions. The rounded inside and angular outside geometry directly affects user interaction: the rounded inner face presents a softer contact surface for fingers, while the angular outer face keeps a sharper visual line when viewed across a bank of cabinets. As a Schwinn original design, the profile and proportions are tied specifically to the Schwinn 2389 family, which matters when matching or expanding an existing installation based on the same product line. The presence of seven lengths in the family supports consistent spacing and alignment across different cabinet sizes while retaining the same design cues.
This appliance pull uses a 320 mm center to center dimension, which sets the distance between mounting points when laying out holes on an appliance panel or large cabinet front.
The Schwinn 2389 Series matte gold appliance pull has an overall length of 12-5/8 inches, giving a long gripping area suited to appliance fronts and larger cabinet panels.
This appliance pull is described with a matte gold finish and also as zamak with dark nickel finish, defining its color and surface appearance for coordinating with other hardware.
The appliance pull is described as zamak with dark nickel finish, indicating a zamak metal construction that provides a solid metal feel on cabinet and appliance fronts.
The pull is rounded on the inside and angular on the outside, giving a smoother surface for fingers while keeping a sharp, modern line facing into the room.
This appliance pull is part of a versatile family of handles in seven lengths, allowing the same Schwinn 2389 design to run across doors, drawers, and appliance fronts.
The Schwinn 2389 Series appliance pull pairs a 320 mm center to center layout with a 12-5/8 inch overall length, giving you an appliance-scale handle ready for modern cabinet runs. Its matte gold finish and clean, modern, understated Schwinn original design align with contemporary interiors that rely on coordinated decorative hardware and moldings. The rounded inside and angular outside profile, along with its role in a versatile family of seven lengths, supports consistent looks from appliance fronts through surrounding doors and drawers. For projects built around Schwinn Hardware styling and metric appliance drilling, this 59367 appliance pull delivers a defined size, finish, and geometry you can plan into your next run.