Schwinn 2389 Series Dark Nickel Appliance Pull gives you a dedicated appliance pull in the 480 mm center to center size, so large doors on built-in units can be operated with a handle sized for that job. The 18-7/8 inch overall length provides a substantial gripping area, which helps when moving heavier appliance doors in a controlled, steady motion. As part of a versatile family of handles in 7 lengths, this pull lets you coordinate long appliance fronts with shorter cabinet doors while maintaining one design. The Zamak construction with dark nickel finish provides a solid metal feel with a consistent surface, useful when multiple pulls are lined up across a run. As a Schwinn original design, it maintains a consistent profile across the series, which supports clean visual alignment in modern installations.
The 480 mm center to center appliance pull layout establishes a fixed drilling pattern, so hole locations can be repeated accurately across multiple appliance fronts. This consistent spacing lets you transfer the same measurements from tall units to adjacent fronts, maintaining horizontal or vertical alignment lines. Because the pull is an appliance pull, its longer span works with those 480 mm centers to distribute operating forces further apart on the panel, helping reduce local stress where the handle is secured. The Zamak construction with dark nickel finish provides a rigid, stable bar across that span, which helps the pull feel solid when gripped at either end or in the center.
The 480MM C/C APPL PULL, DARK NICKEL FINISH is designed as an appliance pull, so it fits applications where a longer handle is needed across wide or tall fronts. The 18-7/8 inch length matches the 480 mm center to center measurement, giving appliance panels a proportional handle that spans more of the door height. As part of a versatile family of handles in 7 lengths, this Schwinn 2389 Series pull can be used on major built-in units while shorter family members handle nearby cabinets. The clean, modern, understated styling pairs with the dark nickel finish to support contemporary appliance fronts, aligning visually with flat panel or similarly minimal door designs. Because the pull is rounded on the inside and angular on the outside, it offers a comfortable surface toward the hand while presenting sharper geometry to the room side.
The rounded on the inside, angular on the outside profile gives installers and users a clear orientation, helping the grip side feel smooth while the outer face keeps a defined line along the run of cabinetry. That geometry aids repeatable positioning, because the flat, angular outer surfaces can be referenced visually against door edges. The 480 mm center to center dimension acts as a fixed datum, simplifying layout templates for repeated drilling across appliance fronts and tall doors. Using the same Schwinn original design across this versatile family of handles means each length carries the same proportions, so even when dimensions change, the visual weight and angles stay consistent. The Zamak with dark nickel finish material combination keeps the surface appearance uniform from piece to piece, supporting precise visual alignment where multiple pulls sit in a grid or in stacked arrangements.
The Schwinn 2389 Series Dark Nickel Appliance Pull is an appliance pull in a Schwinn original design, which provides a coordinated look across a versatile family of handles in 7 lengths.
The Schwinn 2389 Series Dark Nickel 18-7/8 inch appliance pull spans 480 mm center to center, giving a long gripping area across wide or tall fronts where extra leverage is useful.
The 480 mm center to center specification sets the distance between mounting points, so drilling and alignment for this appliance pull can follow a precise, repeatable layout across panels.
The handle is rounded on the inside and angular on the outside, giving a smoother surface toward the hand and a sharper outer line that supports clean, modern visual alignment.
The appliance pull is made from Zamak with dark nickel finish, so installers get a solid metal body with a consistent dark surface across the Schwinn 2389 Series pieces.
This pull belongs to a versatile family of handles in 7 lengths, which lets projects use one Schwinn original design from standard cabinet doors through full appliance fronts.
The Schwinn 2389 Series Dark Nickel 18-7/8 inch appliance pull combines a 480 mm center to center span with a rounded inside and angular outside profile, giving appliance fronts a long, comfortable gripping surface and clear geometry. As a Schwinn original design in Zamak with dark nickel finish, it aligns visually with the rest of the versatile family of handles in 7 lengths. For projects that need consistent modern styling from standard doors through tall appliance panels, this dedicated appliance pull provides the long format that matches those fronts while keeping the same series look across the run.