Schwinn 2389 Series appliance pull describes a Schwinn Hardware handle from the 2389 family that functions as an appliance pull, so it is sized and styled for larger appliance-front applications where a substantial grip is useful. The 480mm center to center appliance pull dimension means the fixing points are set 480 mm apart, which helps align drilling and layout on tall doors or appliance panels. The 18-7/8 inch appliance pull length reference corresponds closely to the 480 mm size, which lets installers work comfortably in both metric and imperial layouts. The matte gold appliance pull finish provides a muted gold tone rather than a high-gloss look, so it supports clean, modern, understated design schemes. The product sits in the Decorative Hardware & Moldings category under handles and pulls, so it is intended for visible installation where appearance is part of the job requirement.
The 480MM C/C APPL PULL description specifies a 480 mm center to center dimension, which gives installers a fixed drilling pattern that simplifies layout on wider fronts and tall appliance panels. The appliance pull classification signals that this handle is intended for appliance fronts rather than only small cabinet doors, so its scale matches heavier-looking doors often used on integrated refrigeration or tall cabinets. Being part of a versatile family of handles in 7 lengths means that the same mounting logic can be repeated across multiple door sizes, which streamlines drilling templates and reduces layout variation from one elevation to another.
The product name Schwinn 2389 Series Matte Gold 18-7/8 inch 480 mm Center to Center Appliance Pull identifies this piece as a long pull suited to tall doors and appliance panels, so it fits well on full-height fronts that benefit from an elongated grip. The category placement under Decorative Hardware & Moldings and handles and pulls indicates it is designed for exposed cabinet and appliance faces, which makes it appropriate for kitchen or casework layouts where hardware appearance is part of the design package. The description rounded on the inside and angular on the outside means users feel a smooth contact surface when pulling, while the visible outer edge stays sharp and linear, so the pull supports repeated daily use without losing the crisp aesthetic required on modern fronts. The clean, modern, understated characterization suggests it pairs effectively with flat-panel fronts and minimal trim, so designers can specify it where they want hardware that supports rather than competes with door and drawer faces. The listing of a versatile family of handles in 7 lengths means installers can deploy shorter 2389 Series pulls on drawers and standard doors while using this 480 mm version as the dedicated appliance pull, keeping all visible hardware visually related across the room.
The 480 mm center to center measurement provides a precise metric spacing between mounting points, which is important for drilling accuracy and repeatability across multiple fronts in a run. The reference to 18-7/8 inches alongside 480 mm lets craftspeople translate the same spacing into imperial terms, so shop drawings and on-site layout can be coordinated whether the team works in metric or imperial. The material description Zamak with dark nickel finish clarifies that the pull uses a Zamak base metal with a dark nickel surface, giving it a metal construction that behaves predictably when tightened against wood or composite fronts. The Schwinn Hardware brand and Schwinn original design statement indicate that the geometry and proportions come directly from the manufacturer, so matching replacement pulls from the same 2389 Series can be specified when future work calls for hardware continuity. The versatile family of handles in 7 lengths detail means drill patterns scale within the same design language, which simplifies template use and reduces rework when adding doors or panels later that need to match the original installation.
The 480 mm center to center dimension states the distance between the pull's mounting points, guiding drilling layout on doors and appliance fronts so holes align with the handle's fixing positions.
The Schwinn 2389 Series Matte Gold appliance pull is described as 18-7/8 inches 480 mm, which places it in a long format suited to tall doors or appliance panels needing an extended grip.
The pull is described as Zamak with dark nickel finish, so the base metal is Zamak and the visible surface has a dark nickel appearance suitable for decorative hardware use.
The rounded inside offers a smoother gripping surface for the hand, while the angular outside keeps crisp lines facing out, supporting both comfort and a modern visual profile.
The description notes a versatile family of handles in 7 lengths, so this appliance pull belongs to a series that provides multiple length options within the same design.
The product class Appliance Pull and the 480 mm center to center size indicate it is intended for appliance fronts or large doors where a longer handle improves grip access.
The Schwinn 2389 Series appliance pull with 480 mm center to center spacing, matte gold description, and appliance pull classification gives installers a clearly defined long handle for tall doors and appliance panels. The combination of rounded inside, angular outside geometry and a clean, modern, understated design profile supports projects targeting contemporary cabinetry. Using this Schwinn original design within its versatile family of handles in 7 lengths allows hardware choices to stay consistent from drawers to appliance fronts. Select this model when a long-format pull with coordinated design language is needed across a space.