Handle-Free Hardware 3914-290 L-Channel is an aluminum pull profile in the Handle-Free Cabinet Hardware Series that creates a handle-free gripping edge along cabinet fronts, so fronts stay visually clean while doors and drawers can still be operated comfortably. The extrusion design provides clean lines, which keeps modern casework looking straight and uncluttered across longer cabinet runs. The dark bronze finish gives the aluminum profile a deeper tone, which blends well with darker fronts or contrasts lightly colored panels without visual glare. The 1 inch width gives the L-channel enough face area to define a crisp shadow line on the cabinet front, supporting an architectural look across base, wall, or tall cabinets in the same run.
This Schwinn Hardware aluminum L-channel pull works as an integrated grip profile along cabinet edges, so layout centers on aligning the 1 inch width with planned front overhangs and reveal gaps. Because it is an extrusion, the profile stays uniform along its length, which aids in creating straight, continuous handle-free runs across several cabinet modules. The dark bronze finish is part of the same Handle-Free Cabinet Hardware Series color range, so designers can keep finish choices aligned when planning profiles for base, wall, or tall units in one elevation. The 114.17 designation in the description identifies this specific L-channel pull profile, helping shops match drawings, cut lists, and production notes to the correct aluminum section.
This 114.17 L-channel pull from the Handle-Free Cabinet Hardware Series is an aluminum extrusion that provides the gripping edge for handle-free cabinet fronts, so it fits best wherever a continuous linear pull is planned. The 1 inch width dimension supports use along horizontal or vertical edges where a defined front band is desired, giving the cabinet face a uniform architectural line. Because the extrusion provides clean lines, it suits long cabinet runs in kitchens, workrooms, or storage walls where designers want uninterrupted reveals instead of individual knobs or pulls. The dark bronze finish allows the same profile to coordinate with other Handle-Free Cabinet Hardware Series colors in a project, because the series offers Clear Anodized, Nickel Color, Dark Bronze, and Black options for related profiles.
The Schwinn Hardware aluminum extrusion provides a fixed, repeatable L-channel profile, so each cut piece shares the same geometry, which simplifies jig setup and machining routines for cabinet shops. The 1 inch wide face gives a clear visual reference during alignment, allowing installers to track the pull position along the full cabinet run and keep reveals even from module to module. As part of the Handle-Free Cabinet Hardware Series, this 114.17 L-channel pull works within a defined hardware family, which helps drafters, engineers, and installers communicate clearly when reading plans, installation drawings, or templates for the same series. The published installation drawings and templates available through the Schwinn Group website support layout of this extrusion, giving project teams a common reference when planning edge details and cut lengths for the handle-free system.
Handle-Free Hardware 3914-290 L-Channel is an aluminum pull extrusion that creates a handle-free gripping edge on cabinet fronts, supporting clean, linear operation of doors and drawers.
The 1 inch width defines a noticeable front band, giving designers a consistent architectural line and installers a clear alignment reference along cabinet edges.
The dark bronze finish provides a deeper tone on the aluminum profile, helping the pull visually coordinate with darker fronts or create controlled contrast on light cabinets.
This L-channel is specified as part of the Handle-Free Cabinet Hardware Series, so it works within a coordinated group of handle-free profiles sharing aligned finishes.
The 114.17 designation identifies this exact L-channel pull profile, helping shops tie drawings, cut lists, and installation details to the correct extrusion.
Installation drawings and templates for this Handle-Free Cabinet Hardware Series extrusion are available through the Schwinn Group website link referenced in the product description.
The aluminum Handle-Free Hardware 3914-290 L-Channel in dark bronze gives cabinetmakers a defined 1 inch wide pull profile that matches the Handle-Free Cabinet Hardware Series, so projects needing clean, architectural cabinet lines can standardize on a single Schwinn Hardware extrusion. Using this specific 114.17 L-channel pull keeps drawings, cut planning, and installation details aligned around one consistent handle-free profile across the job.