192MM C/C handle matte black finish identifies this Schwinn Hardware handle as a 192 mm center to center pull, so hole drilling and alignment follow a clear, repeatable dimension along cabinet or furniture faces. The 7-9/16 in center to center length ties directly to common layout spacing in many cabinet runs, letting installers coordinate multiple doors and drawers on a consistent grid. The Schwinn 2334 Series name points to a specific design family, which helps match this pull visually when extending or refreshing an existing installation. A square profile and modern D-handle shape provide a defined gripping edge, which supports firm hand placement when opening heavier fronts. The matte black finish delivers a dark, non-reflective appearance, giving designers a predictable, uniform color reference when pairing this pull with other decorative hardware and moldings.
The 192 mm center to center dimension defines the fixing point spacing on this Schwinn 2334 Series pull, which lets installers mark and drill cabinet fronts based on a single repeatable measurement. The stated 7-9/16 in size ties that spacing to a familiar imperial reference, so layout can be transferred directly from drawings that list measurements in inches. As a modern D-handle, this part presents a straight, square profile between the mounting points, which makes it easier to spot and correct misalignment visually along door and drawer runs. The combination of square profile and modern D-handle form works with templates and jigs designed around straight bar pulls, supporting efficient installation across multiple cabinets.
This handle sits in the Schwinn 2334 Series, placing it within a modern design line suited to contemporary cabinet and furniture projects. The square profile described in the web description sets clear, crisp edges, which complement flat-panel fronts and other straight-lined decorative hardware and moldings. As a modern D-handle in matte black, it introduces a strong linear element that reads consistently across banks of drawers or tall doors. The 192 mm center to center span places this pull in a mid-length range, which works well on standard cabinet doors or paired on wider drawers. Its role as a handle in the decorative hardware and moldings category means it can be specified alongside other visible trim elements to maintain a coordinated appearance. The matte black finish gives designers a dark anchor point on lighter surfaces, supporting deliberate contrast in kitchens, baths, or built-in furniture.
The defined 192 mm center to center measurement on this Schwinn Hardware handle simplifies jig-based drilling, because the spacing is fixed and documented in both metric and inch terms. The 7-9/16 in description ties directly to that center to center distance, reducing conversion steps when installers work from imperial plans. The modern D-handle configuration spans cleanly between the two mounting points, so any deviation in drilling typically becomes visible during dry fit, allowing alignment corrections before final fastening. A square profile and modern D-handle shape create a straight reference line, which helps installers visually track height and parallelism from one cabinet front to the next. The matte black finish provides a consistent color target, so replacements chosen by the 59372 part number match existing Schwinn 2334 Series pulls within the same project scope.
The handle uses a 192 mm center to center measurement, which sets the distance between mounting holes and guides drilling and layout across cabinet or furniture fronts.
The Schwinn 2334 Series handle is described as 7-9/16 in (192 mm) center to center, which links metric spacing to an imperial length for layout on drawings and fronts.
The handle has a square profile with a modern D-handle form, which supports straight-lined, contemporary cabinet and furniture designs with clean visual runs.
The handle uses a matte black finish, creating a dark, non-reflective surface that coordinates with other matte black decorative handles and pulls in the same space.
The Schwinn 2334 Series designation identifies the design family, which helps match this handle visually when expanding or refreshing an existing Schwinn 2334 installation.
The 59372 part number uniquely identifies this 192 mm matte black handle from Schwinn Hardware, supporting consistent reordering for additional cabinets or later additions.
The Schwinn Hardware 2334 Series 7-9/16 in (192 mm) center to center matte black pull offers a defined 192 mm drilling pattern, a square modern D-handle profile, and a matte black finish that coordinates across decorative hardware and moldings. The clearly stated dimensions and Schwinn 2334 Series designation help align this handle with existing layouts, while the 59372 part number supports consistent selection whenever additional matching handles are needed. For projects calling for a modern square-profile handle with a matte black appearance and 192 mm center to center spacing, this Schwinn Hardware pull provides a documented option that fits those criteria.