Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Schwinn 2389 Series pull is a contemporary bar pull for cabinet doors and drawer fronts, mounting on 6-5/16 inch (160 mm) centers in a Matte Black finish.
The 160 mm center-to-center spacing is the standard drilling pattern for mid-to-wide drawer fronts and full-height door panels where a shorter pull would look undersized. On a base cabinet drawer in the 18 to 24 inch range, a pull at this spacing fills the front in proportion without dominating it. It also suits a tall upper door, a pantry panel, or a furniture-style island where the hardware is expected to hold some visual weight across the width of the front. Because the mounting holes land on 6-5/16 inch centers, this pull drops onto any existing cabinet drilled to that pattern without modification.
The pull is cast in zamak, a zinc-aluminum alloy that takes a consistent surface coating and holds detail through a die-casting process. The Matte Black finish is flat rather than glossy, so the bar reads as a form rather than a reflective accent. That matters on a wider pull: a polished surface across nearly seven inches of hardware draws attention to the grip itself, while a matte surface lets the cabinetry stay in the foreground. The finish is also practical in a kitchen environment, where low-sheen surfaces show smudges less readily than polished ones under overhead lighting.
This pull is a natural fit for a contemporary kitchen or bath where the hardware program is running black and the fronts are flat or shaker-style. Cabinet shops and designers specifying a full run will find the 160 mm spacing covers the widest share of standard drawer and door configurations in a single drilling pattern. It also suits a renovation where the existing holes are already on 6-5/16 inch centers and the goal is a hardware refresh without redrilling. The 2389 Series includes companion pieces, so knobs and additional pull sizes in the same design language and finish are available to complete a mixed-hardware installation.
The 160 mm (6-5/16 inch) measurement is the distance between the centers of the two mounting holes, which is the drilling dimension you match to your cabinet. The 6-5/8 inch (168 mm) figure is the overall end-to-end length of the pull, which is always slightly larger than the hole spacing.
Yes. If your existing holes are on 6-5/16 inch (160 mm) centers, this pull mounts without any additional drilling.
No. Matte Black is its own catalog finish, distinct from Flat Black and from Oil-Rubbed Bronze. Finish names are not interchangeable across brands or collections.
A bar pull at this center-to-center spacing works on both drawer fronts and door panels. The installation is the same two-hole through-mount either way.
When the fronts are wide and the hardware program is black, the Schwinn 2389 at 160 mm centers delivers a proportioned, flat-finish bar pull that coordinates across the cabinet run without calling attention to itself.