256mm center to center handle defines this Schwinn 2389 Series dark nickel pull as a good fit where a 10-1/16 inch drilling pattern is already laid out, so existing holes line up without changing your cabinet or furniture fronts. The handle belongs to a versatile family of handles in 7 lengths, which supports consistent styling across different door and drawer sizes on the same job. The design is rounded on the inside and angular on the outside, so hands feel a smooth grip surface while the visible face keeps a sharper, modern geometry. The pull is made from zamak with a dark nickel finish, giving a solid metal base with a subdued, architectural metal tone that suits many contemporary and transitional projects. As a Schwinn original design, the profile follows a coordinated look that ties in with other Schwinn Hardware pieces on the site.
The 256 mm center to center drilling length on this Schwinn 2389 Series handle aligns with 10-1/16 inch hole spacing, so layout work can follow a single dimension across cabinet runs. Installers working from metric shop drawings can transfer 256 mm directly to drilling jigs, simplifying repetitive boring on production jobs. The rounded inside grip helps fingers locate the pull from either side of a door or drawer front, which supports confident use once mounted. The angular outer face keeps a defined line parallel to the door edge, so installers can align the handle visually to stiles or drawer tops. The dark nickel finish on the zamak base integrates with other dark metal hardware in the space, helping the handle sit quietly within the overall cabinet design while still reading as a finished metal part.
This Schwinn 2389 Series 256mm center to center handle belongs to a versatile family of handles in 7 lengths, which supports running the same design across tall doors, standard base cabinets, and smaller drawers. Using the same Schwinn original design in multiple lengths lets shops and installers keep a single style reference while matching scale to each front. The rounded inside and angular outside profile works on both vertical and horizontal orientations, so one handle family can cover doors and pull-out units. The dark nickel finish keeps the appearance modern and understated, fitting projects where the hardware should support the cabinet design rather than stand out as a focal point.
The fixed 256 mm center to center dimension on this handle sets a clear drilling requirement, which supports consistent hole placement across a production run or a multi-room residential project. When cabinet drawings specify 10-1/16 inch spacing, this handle matches that requirement, reducing layout variation between installers on site. The zamak construction provides a metal base that accepts the dark nickel finish uniformly, which helps rows of handles present the same tone and sheen along upper and lower cabinets. Because the inside of the handle is rounded while the outside is angular, the same pull gives users a comfortable grip while keeping a sharp sightline for alignment against door edges and reveals. As a Schwinn original design, the handle style stays consistent with other Schwinn Hardware offerings, which matters when shops standardize on a brand look for repeat customers.
This Schwinn 2389 Series handle uses a 256 mm center to center dimension, matching a 10-1/16 inch hole spacing so layouts can follow that single measurement on cabinet fronts.
The Schwinn 2389 handle has a rounded inside for a comfortable hand contact surface, while the angular outside keeps a crisp visible edge for clean, modern cabinet sightlines.
This 256 mm center to center handle is made from zamak with a dark nickel finish, giving a metal body with a darker metallic tone for understated cabinet projects.
The Schwinn 2389 Series is described as a versatile family of handles in 7 lengths, allowing this design to run consistently across different door and drawer sizes.
The 10-1/16 inch, or 256 mm, center to center measurement lets installers repeat one drilling dimension, supporting consistent hardware positioning across a cabinet run.
The Schwinn 2389 pull combines an angular outside profile, a rounded inner grip, and a dark nickel finish, creating a clean, modern, understated look for cabinet and furniture fronts.
This Schwinn Hardware 2389 Series 256mm center to center handle in dark nickel finish pairs a zamak metal body with a modern, understated profile, making it suited to projects needing clean lines. The versatile family of handles in 7 lengths lets you carry the same Schwinn original design across doors and drawers while keeping drilling at a known 256 mm, or 10-1/16 inches, for repeatable layouts. Choose this dark nickel pull when a rounded inside grip and angular outside face will match your cabinet fronts and align with other Schwinn Hardware selections on the job.