Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Schwinn 2930 Series pull is a contemporary bar pull for cabinet doors and drawer fronts, mounting on 6-5/16 inch (160 mm) centers.
The 6-5/16 inch center-to-center is the spacing that steps up from the narrower pulls used on standard upper doors and small drawers. At this spacing, the grip reaches far enough to suit a wide base drawer, a full-height pantry door, or a furniture-style island front without looking undersized against the panel. On a slab-front kitchen where the pulls are the primary visual element, a longer bar reads as deliberate scale rather than as an afterthought. This is also one of the common standard spacings, which makes it a workable choice when replacing existing hardware drilled to 160 mm centers.
The pull is cast in zamak, a zinc-aluminum alloy, and finished in Polished Chrome. Chrome is the coordinating metal in most kitchens: it reads the same across faucets, appliance trims, and light fixtures without requiring a brand match. The polished surface runs as a continuous bright line along the flat bar face, which on a wider pull translates into a more pronounced visual presence than the same finish would carry on a shorter grip. The surface wipes clean easily, though a polished finish will show handling marks more readily than a brushed or matte alternative.
This pull suits a contemporary kitchen, bath, or media unit already running chrome fixtures, where the hardware should extend the existing metal tone rather than introduce a new one. Cabinet shops specifying hardware for a spec build or a multi-unit project will find the 160 mm spacing reliable for wide drawer banks and tall door fronts. Designers working on a kitchen refresh where the existing holes are drilled to 6-5/16 inch centers can swap directly without additional drilling. The 2930 Series includes companion pieces, so a mixed knob-and-pull installation across doors and drawers can draw from one coordinated collection.
Center-to-center is 6-5/16 inches (160 mm), which is the distance between the two mounting holes and the number to match against existing drilling. Overall length is 7-9/16 inches (192 mm), the full end-to-end size of the pull. They are different measurements, and the center-to-center is the one that determines fit.
Polished Chrome coordinates well with most chrome faucets and appliance trims, but finish appearance can vary between manufacturers. If an exact match matters, compare the pull in person against your existing fixtures before committing.
Zamak is a zinc-aluminum die-casting alloy used widely in cabinet hardware. It holds detail well and accepts a variety of finishes. It is suited to dry interior applications such as cabinetry.
Yes. At 160 mm centers and 7-9/16 inches overall, it is proportioned for wider drawer fronts and full-height doors alike.
Choose this pull when the job calls for a 160 mm center-to-center bar in Polished Chrome, sized to carry across wide fronts without crowding the edge.