Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Schwinn 2930 Series pull is a contemporary bar pull designed for cabinet drawer fronts, pantry doors, and oversized cabinet applications that call for hardware at this scale. It mounts on 12-5/8 inch (320 mm) centers and measures 13-3/4 inches overall in a Polished Chrome finish.
Most cabinet pulls are sized to doors and drawer banks in the 3 to 7 inch range. A 12-5/8 inch center-to-center pull is a different conversation. It belongs on the wide pulls of a range hood, the face of a deep pot drawer, a full-height pantry door, or an oversized furniture-style island drawer where a short pull would look undersized. At this scale, the pull stops functioning as incidental hardware and starts functioning as a horizontal line across the front, which is part of what makes it worth specifying at width.
The pull is cast in zamak, a zinc-aluminum alloy that holds fine detail and machines cleanly, and finished in Polished Chrome. Polished Chrome is a bright, mirror-level finish: it picks up and reflects the light along the full length of the bar, which at nearly 14 inches overall makes the finish an active part of the hardware's effect. It coordinates naturally with chrome faucets, appliance trim, and light fixture hardware already running in most contemporary kitchens. On white or light-painted fronts the reflective surface creates contrast; on darker cabinetry it reads as a bright accent line.
Cabinet shops and designers specifying contemporary kitchens with oversized drawer banks, pantry towers, or appliance-adjacent cabinetry reach for a pull at this center-to-center when the proportions of the front demand it. Contractors doing a full hardware replacement on a kitchen that runs chrome fixtures will find this pull slots into the existing finish program without introducing a second metal. Homeowners replacing hardware on a wide drawer or pantry cabinet who are drilling new holes will find that 320 mm is a standard spacing carried across the 2930 Series line, so coordinating pieces are available in the same collection.
320 mm is a standard center-to-center value for oversized pulls and is carried consistently across the 2930 Series. If your existing holes are drilled to this spacing you can swap directly. If not, you will need to drill to the new pattern.
Polished Chrome is a hard, bright finish that wipes clean easily. It does show fingerprints more readily than a brushed or matte surface, which is worth knowing on a pull this long.
The 2930 Series includes pulls at multiple center-to-center sizes in the same profile and finish, so you can run smaller pulls on standard drawers and this pull on wide or pantry fronts within the same hardware program.
Zamak is a zinc-aluminum die-casting alloy. It is heavier than aluminum, holds crisp detail from the die, and is the most common base material for decorative cabinet hardware in this catalog. It is not solid brass.
When the drawer or door is wide enough that a standard pull would disappear against it, this Schwinn 2930 pull at 12-5/8 inch centers gives the front the hardware it calls for, in a bright chrome finish that works with the fixtures already in the room.