Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Schwinn Z240 Series pull is a contemporary cabinet pull that mounts on 6-5/16 inch (160 mm) centers, a widely used spacing that makes it a direct fit for cabinetry drilled to that pattern. Finished in Polished Chrome, it suits doors and drawers where the hardware should read bright and clean against the front.
The 6-5/16 inch center-to-center is one of the standard spacings in the cabinet industry, common on mid-width drawer fronts, base cabinet doors, and pantry pulls that need a grip with some reach to it. A pull at this spacing gives a wide enough span to open a drawer with one easy motion, and the 6-13/16 inch overall length keeps it proportional without overrunning the front. For shops building to standard carcass dimensions or contractors matching existing hole patterns, 160 mm is a spacing that appears often enough to stock in volume.
The Z240 is cast from zamak, a zinc alloy that takes a plated finish cleanly and holds its shape under normal cabinet use. Polished Chrome is a bright, mirror-like surface that picks up and reflects the light around it. On a slim half-inch bar the reflection runs as a clean highlight along the face of the pull, making the hardware a visible element rather than a quiet one. Chrome coordinates naturally with stainless appliances, polished faucets, and brushed or chrome light fixtures, which is why it remains a reliable choice for kitchens and baths where multiple metal finishes need to land in the same family. The Z240 Series name in the Schwinn Hardware lineup means companion pieces in the same collection share this finish and design language.
This pull is at home in a contemporary kitchen or bath where the hardware program is already running chrome or where the designer wants a single bright metal to anchor the fixture selections. It works equally well on a new build drilled to 160 mm from the start or on a replacement job where the existing holes are already at that spacing. The slim bar width keeps it from overwhelming narrower fronts while still offering enough grip length to feel substantial on a wider drawer. Cabinet shops running production on contemporary flat-front or shaker cabinetry will find the Z240 a consistent, well-proportioned choice at this center-to-center.
Center-to-center is 6-5/16 inches (160 mm), which is the distance between the two mounting holes and the number to match when replacing existing hardware. Overall length is 6-13/16 inches (173 mm), the full end-to-end size of the pull. Always match the hole spacing, not the overall length.
A polished surface reflects light and shows smudges more readily than a brushed or matte finish. It wipes clean easily, but kitchens with heavy daily use may require more frequent wiping to keep the surface clear.
Yes. The 160 mm center-to-center works on both drawer fronts and door faces as long as the door is wide enough to accommodate the 6-13/16 inch overall length comfortably.
The Z240 is a Schwinn Hardware collection, and companion hardware in the same series carries the same design language and finish. Look for matching knobs or pulls within the Z240 line to build a coordinated hardware set.
The Schwinn Z240 in Polished Chrome at 160 mm center-to-center is a straightforward pull for any installation where the hole pattern is set and the hardware should land cleanly in a chrome finish without introducing a new design language to the room.