Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Schwinn Z240 Series pull is a contemporary bar pull sized for wide drawer fronts, tall cabinet doors, and oversized panel applications where a standard 3 or 4 inch pull would read as undersized.
At 12-5/8 inches between centers, this pull is built for the fronts where smaller hardware stops working visually and practically. Wide base drawers, pantry doors, full-height cabinet fronts, and furniture-scale islands are the natural homes for a 320 mm pull. The grip spans enough of the front that the hand finds it without searching, and the overall 13-1/8 inch length gives the piece the visual mass to stay in proportion with a wide panel. If the existing holes on a drawer bank or a replaced front are drilled at 12-5/8 inch centers, this pull drops right into that pattern without a new drilling layout.
The pull is cast in zamak, a zinc-aluminum alloy that takes a precise finish and holds its shape consistently across a production run. The Polished Chrome surface is a bright, mirror-quality finish that runs as a continuous highlight along the flat 1/2 inch bar. Chrome at this scale reads as a strong horizontal line across the front, which reinforces the contemporary geometry of a flat-panel or slab door program. The polished surface is easy to wipe down and coordinates naturally with chrome faucets, appliance handles, and light fixtures already common in kitchen and bath settings.
Cabinet shops and designers specifying a contemporary kitchen with wide base drawers or tall pantry units will find the 320 mm spacing covers the fronts where a 128 mm or 160 mm pull would leave too much blank face on either side. Contractors doing a full kitchen replacement on an existing layout drilled to 12-5/8 inch centers can match holes without rework. Homeowners rehabbing a furniture piece, a media cabinet, or a bathroom vanity with wide drawer fronts have the same reason to reach for this size. Because it belongs to the Z240 collection, the pull can be paired with shorter Z240 pieces on narrower drawers or doors, keeping the hardware program in one design language across different front widths.
It is a standard spacing at the larger end of the cabinet pull range, used on wide drawer fronts and pantry doors. Measure between the centers of your existing holes to confirm the pattern before ordering.
The grip section is 1/2 inch (12.5 mm) wide, a slim profile that keeps the pull linear and flat-looking against the door face.
A polished surface is more likely to show prints than a brushed or matte finish, but it wipes clean quickly with a dry or damp cloth.
Yes. The Z240 collection spans multiple center-to-center sizes in the same finish and profile, so narrower fronts can take a shorter Z240 pull while wide drawers use this one, with the hardware staying in one family.
Choose this pull when the front is wide enough to need 320 mm centers and the hardware program calls for polished chrome in a slim contemporary bar.