192MM C/C pull polished chrome describes this Schwinn 2891 Series bar-style handle that offers a 7-9/16 in (192 mm) center-to-center mounting span, so it aligns with standard 192 mm drilling patterns on cabinet and furniture fronts. The clean, horizontal bar design keeps sightlines simple across doors and drawers, which suits projects where consistent, straight hardware lines matter. A molded recessed area and lip provide good grip, so hands catch the pull positively when opening heavier or taller fronts. Because the molded recess is integrated into the bar, the horizontal line of the handle is undisturbed, keeping the visual run uninterrupted across multiple cabinets. The pull is finished in polished chrome, giving a bright, reflective surface that visually ties into other polished chrome decorative hardware. As part of the Schwinn 2891 Series, this pull fits into a coordinated design family for unified hardware layouts.
The 192 mm center-to-center measurement on this Schwinn 2891 Series pull defines the distance between mounting points, so installers can template or drill door and drawer fronts accurately for this specific span. At 7-9/16 in overall center spacing, the pull fits layouts that call for longer handles on wider cabinet faces. Because the bar is oriented horizontally, it suits mounting on both doors and drawers where a straight, level pull is desired. The molded recessed area and lip are built into the gripping face of the bar, so hand contact stays clear of the mounting points once the pull is installed. With a polished chrome finish, the pull visually matches other polished chrome decorative hardware, which simplifies hardware planning across an entire project.
The Schwinn 2891 Series 7-9/16 in (192 mm) center-to-center polished chrome pull works well wherever a longer horizontal bar handle is needed on cabinets, furniture, or casework. The clean, horizontal bar can run consistently across banks of doors and drawers, supporting designs that rely on hardware to emphasize long lines. Because the center-to-center dimension is fixed at 192 mm, it suits layouts that follow that drilling standard, whether in new work or when matching that spacing in existing fronts. The molded recessed area and lip contribute a practical grip area, which is helpful on frequently used doors such as kitchen base cabinets or tall storage units. As a Schwinn original design in the Schwinn 2891 Series, the pull can be specified alongside other lengths in the same family to keep appearance coordinated while scaling handle length to door or drawer width.
The defined 192 mm center-to-center span on this pull supports repeatable drilling and installation across multiple fronts, because hole spacing is tied directly to the product specification. The clean, horizontal bar profile reduces visual noise, making it easier to align hardware lines during installation without competing shapes or angles. The molded recessed area and lip concentrate grip in a predictable spot on the handle, which helps users grab the same area every time and reduces hand strain on heavier openings. Keeping the horizontal line of the handle undisturbed means that, once aligned, the pull reads as a continuous bar across adjacent cabinets, supporting precise visual layouts. The polished chrome finish adds a uniform reflective surface that responds consistently to light across every installed pull, which is important when many pulls are used in the same line of sight. Being a Schwinn original design within a Schwinn 2891 Series system, it allows designers and installers to rely on a single design language while varying length for different cabinet sizes.
The 192 mm center-to-center dimension describes the distance between the pull's mounting points, guiding accurate drilling and helping it match layouts based on the same spacing.
The molded recessed area and lip create a defined gripping zone on the bar, so fingers settle securely and operate doors or drawers with better control.
The clean horizontal bar keeps the pull's profile simple, so hardware lines stay straight and visually consistent across cabinets and casework.
The undisturbed horizontal line keeps the pull visually continuous, which supports long, uninterrupted runs of hardware on doors and drawers.
The polished chrome finish provides a bright, reflective surface, helping the pull coordinate with other polished chrome decorative hardware elements.
This pull is identified as a Schwinn original design in the Schwinn 2891 Series, supporting projects that want a consistent, series-based hardware look.
The Schwinn 2891 Series 7-9/16 in (192 mm) center-to-center polished chrome pull combines a clean horizontal bar, a molded recessed grip area with lip, and an undisturbed handle line to support visually aligned, repeatable 192 mm installations. For projects built around polished chrome decorative hardware and a coordinated Schwinn 2891 Series design language, this pull offers a defined mounting span and a practical, series-based option that keeps grip, alignment, and appearance consistent across doors, drawers, and casework using the same center-to-center standard.