384mm center to center tab pull from the Schwinn Full-Length Tab Pull Series gives cabinets a continuous grip along the edge of the front, so doors or drawers can be opened from anywhere along that run. Schwinn Hardware identifies this pull as part number 59319, which ties it directly to the 3766 Series for consistent selection across projects. The 384 mm center to center dimension defines the drilling pattern, which helps align this pull precisely on cabinet fronts designed around that metric spacing. The dark bronze finish establishes a deep, uniform color on the exposed edge, helping this pull read as a deliberate design element on modern casework. Being part of the Schwinn Full-Length Tab Pull Series means it is intended to run the full length of the cabinet drawer or door, supporting layouts where hardware becomes a strong linear feature.
The stated 384 mm center to center dimension on this Schwinn 3766 Series tab pull defines where mounting holes align, so cabinet fronts can be drilled to match that exact spacing. Because the Schwinn Full-Length Tab Pull Series is designed to run the full length of a drawer or door, the pull length and the cabinet front length are coordinated, which supports layouts where the hardware edge tracks closely with the cabinet edge. The dark bronze finish is set at the factory, so the installed pull presents a finished surface immediately once it is fixed to the front. Referencing manufacturer part 59319 during planning ties the pull to this specific size and finish, helping maintain consistency across all fronts using the same drilling pattern.
The Schwinn 3766 Series 15-1/8 in (384 mm) center to center dark bronze tab pull is suited to cabinet drawers or doors designed to accept a full-length grip along the front. Its role in the Schwinn Full-Length Tab Pull Series means it is intended to extend across the full length of the cabinet drawer or door, so it works well where hardware is meant to echo the casework width. The 15-1/8 in (384 mm) center to center measurement aligns with projects built around metric drilling, tying the handle position to that dimension. As a tab pull in dark bronze, it presents only a minimal exposed profile at the edge while still defining a strong horizontal or vertical line on the cabinet face.
Being part of the Schwinn Full-Length Tab Pull Series links this tab pull to seven other standard lengths, as noted in the series description, which helps plan hardware across banks of varying cabinet sizes while keeping the same profile. The 384 mm center to center size slots into that group of eight standard lengths, so installers can coordinate different fronts and still maintain a common drilling logic. The dark bronze finish provides a consistent tone from pull to pull, which supports uniform appearance when several handles from the same series are used in a room. Identifying this model with manufacturer part 59319 gives a precise reference for reorders or extending an existing installation, tying future work back to the same 3766 Series design, length, and finish.
The Schwinn 3766 Series tab pull is defined by its 15-1/8 in (384 mm) center to center measurement, which sets the drilling distance between mounting points on the cabinet front.
The Schwinn Full-Length Tab Pull Series is designed to run the full length of a cabinet drawer or door, so the pull follows the entire edge and creates a continuous linear hardware detail.
This Schwinn 59319 tab pull has a dark bronze finish, providing a uniform dark tone that visually coordinates with other dark bronze decorative hardware in a project.
The Schwinn 59319 tab pull belongs to the Schwinn 3766 Series and is part of the Schwinn Full-Length Tab Pull Series, aligning it with other lengths sharing the same design profile.
The 384 mm center to center drilling dimension provides a fixed spacing for mounting holes, which supports consistent alignment of this pull on cabinet fronts using that metric standard.
The Schwinn Full-Length Tab Pull Series is available in Clear Anodized, Nickel Color, Dark Bronze, and Black, so projects can use the same profile across different finish schemes.
The Schwinn 3766 Series 15-1/8 in (384 mm) center to center dark bronze tab pull, identified as part 59319, combines a defined drilling pattern with a full-length tab profile for linear cabinet layouts. Its role in the Schwinn Full-Length Tab Pull Series means it aligns with other standard lengths and finishes across the same profile, supporting coordinated hardware throughout a job. When a project calls for a 384 mm center to center dark bronze tab pull that visually tracks the full length of drawers or doors, this Schwinn Hardware model provides that specific size, series relationship, and finish.