Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schwinn 3766 Series tab pull defines a cabinet front with a single continuous grip that runs the full length of the drawer or door. The 22-11/16 in (576 mm) center to center dimension gives installers a known drilling reference when laying out modern, linear cabinet runs. As part of the Schwinn Full-Length Tab Pull Series, this pull is intended to span the entire width of the front, so the handle and cabinet line up visually from edge to edge. The dark bronze finish creates a consistent, dark accent band along the top or side of the front, which supports clean modern design. Being a tab pull, it mounts at the edge of the front so the hand engages from behind the lip, which keeps the visible face streamlined during daily use.
The 576 mm center to center drilling of this Schwinn Hardware tab pull gives a fixed reference for boring jig setup when working through a bank of cabinets. Because the pull is designed as a tab style, it sits along the front edge, so its length and hole spacing guide where the front edge is located relative to the drilling pattern. Using a pull that is intended to run the full length of the drawer or door lets installers visually confirm squareness: once mounted, the straight line of the pull highlights any twist in the front. The dark bronze finish also makes the edge treatment stand out, which helps align adjacent fronts by eye during mounting.
This Schwinn Full-Length Tab Pull Series piece lives in the Decorative Hardware & Moldings category under Handles and Pulls, so it is suited to projects where the pull becomes a visible part of the cabinet design. The 22-11/16 in (576 mm) center to center measurement pairs with cabinet fronts that are wide enough to accept a pull running nearly edge to edge, so it works well on broader drawers or doors. As a tab pull from Schwinn Hardware, it is intended for edge mounting on cabinet drawers or doors where a minimal, linear grip is preferred. The dark bronze finish coordinates with design schemes that call for a dark, continuous line along the cabinet front, giving the hardware a defined but controlled presence on the installation.
The 576 mm center to center drilling dimension on this Schwinn 3766 Series tab pull matters because it sets a precise, repeatable layout for hardware boring across multiple fronts. When the same measurement repeats, installers can use one jig setting to process an entire run of suitable cabinets, reducing layout steps. Being part of a series with eight standard lengths means different cabinet widths in the same room can still use the same profile, which keeps visual rhythm while handling narrow and wide fronts. The option of Clear Anodized, Nickel Color, Dark Bronze, and Black within the same Schwinn Full-Length Tab Pull Series lets projects maintain one grip style while responding to different room palettes or zones. The dark bronze finish on this specific pull provides a strong, dark linear element, which can help define drawer and door edges where shadow lines and contrast are part of the design intent.
The Schwinn 3766 Series 59321 tab pull has a 22-11/16 in (576 mm) center to center dimension, which sets the hole spacing used when drilling the cabinet front.
The Schwinn Full-Length Tab Pull Series is designed to run the full length of a cabinet drawer or door, so it aligns visually from edge to edge along the front.
The Schwinn Hardware 59321 pull has a dark bronze finish, giving the cabinet front a continuous dark accent line where the pull meets the edge.
This 576 mm center to center pull is one of eight standard lengths in the Schwinn Full-Length Tab Pull Series, which supports consistent styling across different cabinet widths.
This product is classified under Decorative Hardware & Moldings in the Handles and Pulls class, so it serves as both a functional grip and a design element.
The manufacturer part number 59321 identifies this exact Schwinn 3766 Series dark bronze, 576 mm center to center tab pull when specifying or reordering.
The Schwinn 3766 Series tab pull with its 22-11/16 in (576 mm) center to center drilling and dark bronze finish offers a defined, full-length grip for wider cabinet drawers and doors. As part of the Schwinn Full-Length Tab Pull Series, it supports linear, modern cabinet layouts where hardware and front align from edge to edge. For projects using Decorative Hardware & Moldings in a Handles and Pulls class, this Schwinn Hardware 59321 pull provides a consistent profile and a dark bronze visual band wherever a full-length tab pull is required.