64mm tab pull matte gold puts a compact, modern grip right at the edge of the door or drawer, so users catch it quickly and avoid fumbling on frequently used cabinets. The Schwinn Z245 Series identity ties this pull to a consistent design family, which helps keep projects visually aligned across a run of cabinets. The 2-1/2 in (64 mm) center to center dimension sets a predictable drilling pattern, so layouts repeat cleanly from piece to piece. A slender tab pull profile keeps the hardware visually light, which helps cabinets look less bulky in tight or high-visibility spaces. The simple, graceful curve shapes the front of the pull, so hands follow a smooth surface during use. A pronounced lip underneath creates a defined gripping edge, which gives fingers a clear purchase point and improves everyday handling on doors and drawers.
The 2-1/2 in (64 mm) center to center dimension defines the drilling pattern, so installers can set up repeatable jigs for straight, efficient hole placement. Positioning the pull as a tab at the edge of the panel puts the grip exactly where doors and drawers are operated, which speeds up access during normal use. The compact span works well on smaller fronts, because the mounting points sit closer together and fit narrow rail widths. As a Schwinn Hardware component, the pull aligns with common cabinet hardware practices, which supports straightforward integration into standard casework layouts. Using the defined center spacing on every front keeps hardware heights and offsets uniform, which improves the finished look of a bank of cabinets.
This Schwinn Z245 Series 2-1/2 in (64 mm) center to center matte gold tab pull is built for cabinet doors and drawers where a compact edge grip is preferred. The slender profile helps retain a clean fascia on modern casework, because the hardware reads as a thin line rather than a bulky handle. The simple, graceful curve is visible from the front, which adds a soft contour without distracting from door or drawer face materials. The matte gold finish supports warm-toned room schemes, so the pull can sit alongside other decorative hardware and moldings without visual conflict. In use, the pronounced lip underneath allows fingers to hook the pull reliably, which is helpful on lower drawers and upper doors where access angles change through the day.
The defined 64 mm center to center spacing gives installers a fixed reference, which helps create drilling templates that transfer from cabinet to cabinet with consistent results. Using one Schwinn Hardware part number, 59376, across a project also simplifies planning, because the same pull can be repeated anywhere the design calls for this tab style. The Zamak construction with Satin Nickel finish referenced in the product description connects this pull to a specific material and finish treatment within the Schwinn range, which helps buyers align it with other pieces specified to the same standard. Because the pull is part of the Schwinn Hardware handles and pulls class, it fits into established decorative hardware selections, which supports streamlined ordering and spec documentation. When the same Z245 Series profile is used across a room, the graceful curve and pronounced lip repeat at every opening, which makes operation feel consistent from one cabinet front to the next.
The Schwinn Z245 Series tab pull has a 2-1/2 in (64 mm) center to center size, so hole drilling and layout can follow a standard, repeatable spacing on all fronts.
The pronounced lip underneath provides a clear finger catch, so doors and drawers can be gripped securely, especially on heavier or frequently used cabinet fronts.
The slender tab pull profile works well on modern cabinets and tighter spaces, because it keeps the hardware visually light while still offering a defined handhold.
The matte gold finish gives the tab pull a warm, subdued metallic tone, which helps it coordinate with other warm finishes and reduces glare on cabinet faces.
The simple, graceful curve guides the hand onto the pull, so users meet a smooth surface that feels comfortable during repeated opening and closing.
The Schwinn Z245 Series pull combines a slender tab profile, 64 mm center to center mounting, and a pronounced lip, so projects gain uniform handling and a consistent modern look.
The Schwinn matte gold tab pull with 2-1/2 in (64 mm) center to center spacing brings a slender Z245 Series profile, graceful curve, and pronounced lip to cabinets, so projects gain predictable layout, comfortable grip, and a unified hardware look across every front.
Sold In: 1 Each