3/8 x 3 Honeycomb Cutting ZrN Coated Compression Bit identifies this Amana Tool router bit as a compression-style cutter with a 3/8 inch diameter and 3 inch cutting length, so CNC operators can match it to nested or profiling toolpaths that call for those dimensions. The 3/8 inch shank detail means the bit fits collets designed for that shank size, supporting stable holding during honeycomb panel routing. Its compression router bit design is specified to provide a burr-free top and bottom finish when the workpiece is thicker than 0.250 inch, which helps reduce or eliminate edge cleanup on thick sandwich panels. The 6-flute configuration spreads the cut across multiple cutting edges, which supports smooth cutting action in honeycomb and rigid board materials. A ZrN coated cutting surface is designated, which is suited to the listed honeycomb and board materials in normal CNC routing conditions.
This Amana Tool compression router bit is described as providing a burr-free top and bottom finish when the workpiece is thicker than 0.250 inch, so programming it into CNC jobs for panels above that thickness supports clean upper and lower faces in a single pass depth. The 3/8 inch diameter and 3 inch cutting length give a defined tool envelope, allowing operators to set spindle speeds, feed rates, and step-downs appropriate for those dimensions within standard CNC practices. The 3/8 inch shank detail lines up with common CNC collet sizes, which allows straightforward installation into machines already tooled for that shank. The note that mist lubricant system or air cooling is recommended for optimal cutting results guides environmental support at the spindle, so the bit runs in conditions that support the cutting action described.
This Amana Tool honeycomb cutting compression bit is described as excellent for cutting Bio Board, Falconboard, Aluminum Honeycomb Panel (AHP), carbon fiber honeycomb, and cardboard, so CNC shops working with those materials can assign it as a dedicated tool in their routing libraries. The compression router bit geometry is specified to provide a burr-free top and bottom finish when the workpiece exceeds 0.250 inch thick, which is valuable when both faces of a honeycomb or board panel act as finished surfaces. That burr-free performance on thicker workpieces means routed panel edges can exit the machine ready for subsequent assembly stages where clean edges matter. The ZrN coating on the cutting edges is tied to this bit, and that coating type is commonly used for demanding composites and boards, so its presence supports ongoing performance through repeated passes in honeycomb structures. The bit is categorized under CNC router bits, which aligns it with CNC router workflows instead of manual handheld routing in typical shops.
The specified 3/8 inch diameter and 3 inch cutting length give programmers fixed parameters for toolpath offsets and maximum depth, which helps maintain clearance while fully engaging the flute length in thicker honeycomb panels. With a 3/8 inch shank, tool holders already set up for that shank size can clamp the bit consistently, supporting repeatable runout behavior across tool changes. The 6-flute layout places multiple edges into the cut, so feed per tooth can be balanced against spindle speed within standard CNC programming to match the smooth cutting action implied. The recommendation to use a mist lubricant system or air cooling for optimal cutting results ties cooling and chip evacuation to surface finish outcomes, particularly when cutting Bio Board, Falconboard, Aluminum Honeycomb Panel, carbon fiber honeycomb, or cardboard. The manufacturer part number 46308 clearly identifies this exact geometry and coating combination, which supports repeat ordering when a shop standardizes on this tool in its CNC jobs.
This Amana Tool compression router bit is described as excellent for cutting Bio Board, Falconboard, Aluminum Honeycomb Panel (AHP), carbon fiber honeycomb, and cardboard, so it targets those specific CNC panel materials.
The compression router bit design is specified to provide a burr-free top and bottom finish on workpieces thicker than 0.250 inch, which supports clean panel faces directly off the CNC router.
The Amana Tool 46308 bit has a 3/8 inch diameter, 3 inch cutting length, and 3/8 inch shank, which helps match the tool to CNC collets and programmed cut depths.
This bit is specified as ZrN coated, which supports its described role in cutting Bio Board, Falconboard, aluminum honeycomb panels, carbon fiber honeycomb, and cardboard in CNC routing tasks.
The Amana Tool compression router bit notes that a mist lubricant system or air cooling should be used for optimal cutting results during CNC routing operations.
The compression router bit is specified to provide a burr-free top and bottom finish when the workpiece thickness is greater than 0.250 inch, which suits thicker panel constructions.
The Amana Tool 3/8 x 3 Honeycomb Cutting ZrN Coated Compression Bit, with 3/8 inch shank and 6-flute design, is purpose-defined for CNC routing of Bio Board, Falconboard, Aluminum Honeycomb Panel, carbon fiber honeycomb, and cardboard. Its compression geometry is specified to deliver a burr-free top and bottom finish on workpieces thicker than 0.250 inch, which supports clean edges on finished panel faces. The ZrN coating and CNC router bit classification align this tool with demanding honeycomb and rigid board routing. For CNC jobs centered on these materials and thicknesses, this bit offers a clearly defined geometry and role in the toolpath plan.