MDF Laminated Panels Red, PET Panel, MDF 18 mm Thickness, 48 x 108

MDF Laminated Panels Red PET For Casework

MDF laminated panels red PET describe a medium density fiberboard core faced on both sides with a red PET laminate, giving fabricators a stable panel that arrives ready for sizing and machining. The 18 mm thickness creates a substantial core for cabinet components, so doors, drawer fronts, and vertical partitions feel solid in use. The 48 x 108 inch size lets shops nest multiple parts from a single sheet, which reduces cutting time on saws or CNC. PET panels applied to an MDF core with non-PVC plastic laminate provide a consistent working surface, so cutting tools see the same material at every pass. A special surface treatment enhances scratch resistance to class 5 Martindale test levels, helping finished fronts resist visible marking during normal handling and cleaning. The same treatment delivers class 1B DIN 68861 chemical resistance, which supports use where routine cleaning products are present.

Key Red Gloss PET Panel Working Advantages

• The red gloss PET, 2 sides configuration provides a finished face and back, so parts cut from the sheet present a decorative surface on both sides in door, panel, or partition applications.
• The color uses pigments perfectly stable at UV light exposure and an anti-fading lacquer, so installed fronts and panels retain their red tone over the years in typical indoor light conditions.
• The surface is offered in Maxxigloss and Maxximatt finishes, giving shops a choice between super high gloss reflectivity or super high opacity matte to match design intent across a project.
• Maxxigloss achieves over 92 gloss, creating a very reflective surface that supports contemporary high-sheen layouts when panels are aligned across banks of doors or tall units.
• Maxximatt provides about 5 gloss with a soft, velvety touch and a no fingerprint effect, which reduces visible smudging on frequently handled doors and drawer fronts.

Red PET Panel Fit, Thickness, And Edge Sealing

The MDF 18 mm thickness establishes a common cabinet core dimension, which simplifies integrating this red PET panel with other 18 mm construction layouts. The 48 x 108 inch format supports efficient cutting patterns for tall pantry doors, wardrobe sides, or continuous wall runs. PET panels applied to the MDF core maintain a consistent layer on both faces, which helps dimensional balance when moisture or temperature vary across a room. All four sides are sealed with edgebanding, which protects the MDF core from moisture exposure at the sheet perimeter during storage, transport, and fabrication. The edgebanding is color non-matching, signaling that perimeter edges are protected stock edges rather than finished visible edges, so fabricators can plan final edgeband passes where a color-matched edge is required.

Using This 3B PET Panel In Cabinet Projects

Where Red Gloss PET MDF Panels Perform Best

These PET panels applied to MDF are described as ideal for the production of components for the kitchen sector, so cut-to-size parts can be used for fronts, ends, and tall units in residential or commercial kitchens. The same panel construction is designated for bedroom components, supporting wardrobe doors, drawer fronts, and case sides where visual continuity across large surfaces matters. Bathroom projects benefit from the scratch resistant and chemical resistant surface, because vanity fronts and side panels are exposed to cosmetics and cleaners during day-to-day use. Living-room sector applications, such as media walls or shelving fronts, use the red color and gloss or matte finish to create a continuous design language across multiple cabinets. Other commercial applications are also mentioned, so shopfitters can specify the panel for reception desks, wall cladding elements, or storage fronts where a consistent red surface and predictable machining behavior are required during installation.

Why Surface Treatment, Color Stability, And Core Matter

The special surface treatment that achieves class 5 Martindale scratch resistance gives installers confidence when handling doors and panels on site, because normal contact during hanging and alignment is less likely to leave visible marks. Class 1B DIN 68861 chemical resistance means the PET surface tolerates contact with common household or light commercial chemicals better than untreated laminates, which helps finished fronts maintain appearance under routine cleaning. The statement that there is no color variation from batch to batch allows larger projects to be staged over time while keeping consistent red tone across all components. Pigments perfectly stable at UV light exposure and the anti-fading lacquer work together to maintain color over the years, which matters when some faces receive more daylight than others along a run of tall units. The FSC MDF and CARB P2 MDF references describe cores aligned with recognized MDF standards, supporting projects where documented material sourcing and emissions profiles are part of the specification. Being PVC free, PHTHALATES FREE, REACH compliant, and characterized by low VOCs emissions positions the panel for use in interiors where material selection is driven by formal documentation. Available certifications such as FSC, ISO 9001, ISO 14001, PEFC, and TUV Rheinland DIN EN 15187 give fabricators and project managers traceable data on production quality and surface lightfastness testing, which supports submittal packages and project documentation.

Common Questions About This Red PET MDF Panel

Selecting This Red Gloss PET MDF For Projects

This red gloss PET, 2 sides, 18 mm x 4 x 9 panel from 3B S.p.A pairs a stable MDF core with a PET surface engineered for scratch and chemical resistance, so it suits kitchens, bedrooms, bathrooms, and commercial interiors. The combination of UV-stable pigments, anti-fading lacquer, and batch-to-batch color consistency supports multi-phase installations where visual uniformity matters. With defined Maxxigloss and Maxximatt finish options and documented certifications, this panel fits projects that balance appearance, handling performance, and formal material criteria. Use this sheet when a red PET laminated MDF board with controlled gloss, tested durability, and sealed edges matches the design and specification requirements of your next run.