Formica IdealEdge 3526-46 Travertine Etchings Finish Double Radius Edge Molding, 1-1/2" H x 144" L

Formica IdealEdge 3526-46 Edge Molding Use

Formica IdealEdge 3526-46 edge molding is a laminate edge molding that finishes exposed laminate edges so countertops, islands, desks, and work stations match the Formica surface pattern. The 1-1/2 inch height gives coverage on standard laminate build-ups, so the substrate and seam are concealed for a cleaner, more integrated look. A double radius profile shapes both top and bottom edges, which softens corners and creates a comfortable edge where arms and hands rest. The Travertine Etchings finish matches the coordinating laminate pattern, so the edge reads as a continuous stone look instead of a separate strip. A moisture barrier MDF core supports the laminate, which helps the edge stand up in normal kitchen, bath, or commercial work areas where occasional moisture is present. The 12 foot length supplies a continuous run for typical residential or light commercial counters, which reduces joints along the front edge.

Key Formica IdealEdge Features For Projects

• This laminate edge molding is part of Formica IdealEdge, so it is designed to give a finished look on all sides of a laminate top, reducing exposed raw core around work surfaces.
• The double radius edge profile shapes both top and bottom edges, which creates a smooth hand-feel along counters and limits sharp transitions at the front edge.
• The Travertine Etchings finish coordinates with Formica surfaces in the same pattern, so the edge visually carries the stone look from deck to front profile.
• The 1-1/2 inch profile height works with common laminate top constructions, giving vertical coverage that hides build-up material and gives a thicker stone-like appearance.
• The moisture barrier MDF core sits behind the decorative surface, which provides a stable base for bonding and supports the laminate where water splashes are common.
• The 12 foot length is supplied as a single section, which allows long uninterrupted front edges on many counters and reduces time spent aligning joints during installation.

Installation Fit For Laminate Edge Projects

This Formica IdealEdge laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can handle most counter layouts in a shop or on site. Its 1-1/2 inch height and laminate construction pair with typical countertop build-ups, simplifying layout when trimming to length and mitering corners. The product is specified for use on countertops, islands, desks, and work stations, so it fits the dimensions and wear patterns common to those applications. A moisture barrier MDF core gives a consistent substrate for bonding the edge to the deck. Recommended glue is the AFF522 series, which is sold separately, so installers can select an adhesive system that aligns with this specification. The 12 foot length allows many fronts to be edged with one continuous piece, which reduces alignment work at seams.

Where This Travertine Edge Molding Fits

Applications Across Countertops, Islands, And Desks

This Formica IdealEdge 3526-46 Travertine Etchings laminate edge molding is designed for use on countertops, islands, desks, and work stations, so it covers a broad range of horizontal work surfaces in kitchens, offices, and commercial spaces. It is suitable for straight, curved, clipped, and 90 degree edges, allowing the same profile to run across radiused islands, clipped corners, and standard square returns without changing edge stock. The 1-1/2 inch profile height suits typical laminate build-ups, letting fabricators run the edge along standard deck thicknesses while keeping the decorative face centered. The Travertine Etchings finish aligns with matching laminate sheets, so tops can be planned as a coordinated system from deck to edge.

Details That Support Consistent Edge Results

The double radius edge profile on this laminate edge molding shapes both upper and lower corners, so once it is bonded and trimmed, the front edge presents a consistent rounded profile along the full 12 foot length. This matters when several sections meet on long runs, because matching radii help maintain a uniform sightline across joints. The moisture barrier MDF core behind the laminate provides a predictable nailing and clamping surface while adhesive cures, and it supports the decorative layer in areas that may see splashes or spills. Specifying the AFF522 series glue, sold separately, ties the bonding step to a recommended adhesive family, which supports long-term adhesion performance at the edge. The single 12 foot section length allows installers to plan edge cuts, miters, and returns from a continuous run, which helps reduce offcuts and rework on common kitchen and work station layouts.

Common Questions About This Formica IdealEdge

Select This Travertine IdealEdge For Laminate Runs

The Formica IdealEdge 3526-46 Travertine Etchings double radius edge molding pairs a 1-1/2 inch profile with a 12 foot length, so it fits common laminate countertop, island, desk, and work station projects. Its laminate construction, moisture barrier MDF core, and suitability for straight, curved, clipped, and 90 degree edges support consistent fabrication across varied layouts. Using the specified AFF522 series glue, sold separately, aligns installation with the manufacturer recommendation. For projects built around the Travertine Etchings pattern, this edge molding provides the coordinated front profile needed to carry the look through.